Canon ColorPASS-GX400 Procedura di installazione - Pagina 3

Sfoglia online o scarica il pdf Procedura di installazione per Stampante All in One Canon ColorPASS-GX400. Canon ColorPASS-GX400 28.

Installation Procedure > In the case iR-ADV C5255/C5250/C5240/C5235 Series > Installing the Open I/F PCB

Checking the Contents

[1] PS Unit X 1

[2] Open I/F PCB X 1

[4] Power Cord

[5] Cross Ethernet

Cable 3.0m X1

Europe x 2

USA x 1

[4] Power Cord: The connector has a different shape depending on locations.

Use the correct power code to mach the location/area of installation.

Make sure not to leave unused power code at the site.

< CD/Guides >

• Media Pack

Check that the main power switch is OFF.

1) Turn OFF the main power switch of the host machine.

2) Be sure that display in the Control Panel and the lamp of the main power supply are turned

off, then disconnect the power plug.

Installation Procedure > In the case iR-ADV C5255/C5250/C5240/C5235 Series > Installing the Open I/F PCB

[3] Interface Cable X 1

■ Installing the Open I/F PCB

1) Remove the Left Rear Cover.

• 2 Rubber Caps

• 2 Screws

• 5 Claws

[6] Shield Ethernet

Cable 3.0m X1

F-1-4

In the case iR-ADV C5255/C5250/C5240/C5235 Series

Rubber Caps

Claws

F-1-5