American Standard ELLISSE OVAL 2709 Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Vasca idromassaggio American Standard ELLISSE OVAL 2709. American Standard ELLISSE OVAL 2709 4. Whirlpool / bathing pool

Stampa la pagina

INSTALLATION INSTRUCTIONS

ELLISSE OVAL™

HIGH GLOSS ACRYLIC

2709.XXXW SERIES WHIRLPOOL / BATHING POOL

240 mm

(9-7/16)

305mm(12) X 229mm(9)

CUTOUT IN FLOOR FOR DRAIN

978 mm

(38-1/2)

489mm

(19-1/4)

76mm

(3)

C L OF DRAIN

OUTLET

SAFE-T-HEATER

REMOVABLE BLANK

86mm

(3-3/8)

38mm

(1-1/2)

502mm

(19-3/4 )

464mm

(18-1/4)

1-1/2 N.P.T.M.

THREADS

1-1/2 O.D.

TAILPIECE

GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL

69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT 3 )

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM II PUMP

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modiﬁcations to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath ﬁller, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all ﬁnished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

751753-100 Rev. L

1759 mm

(69-1/4)

OUTLINE OF

CUTOUT

ON/OFF

SWITCH

PUMP

PROVIDE ACCESS

TO PUMP FOR

SERVICING ON ALL

INSTALLATIONS

INTEGRAL

FEET

SUPPORT

ROUGH

FLOOR

35mm

(1-3/8)

98mm

(3-7/8)

107 Lbs. (49 Kg.)

640 Lbs. (291 Kg.)

64 Gal. (243 L)

53 Gal. (201 L)

45 x 23 In. (1143 x 584mm)

63 x 32 In. (1600 x 813mm)

13 In. (330mm)

35 Lbs./Sq.Ft. (166 Kgs./Sq.m)

25.6

49.4

2.1 HPR, 15.6 AMPS, 120V.

THANK Y O U.. .

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to ﬁnish the

installation are your selected ﬁttings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470*

• Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

All product names listed herein are trademarks

of AS America, Inc. unless otherwise noted.

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 20 amp GFCI

Outlet

• Cement, Plaster,

Grout