eKids 430 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistema stereo portatile eKids 430. eKids 430 12. Cd boombox
Anche per eKids 430: Manuale di avvio rapido (15 pagine), Manuale di avvio rapido (2 pagine), Manuale (2 pagine), Manuale di avvio rapido (5 pagine)

Stampa la pagina

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warning.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacture's instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding plug. A polarized plug has two blades with one

wider than the other. A grounding plug has two blades and

a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at the plugs, convenience receptacles, and at

the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Unplug the apparatus during lightning storms or when

unused for long periods operate during intended use.

13. Refer all servicing to qualified personnel. Servicing is

required when the apparatus has been damaged in any

way. Examples of damage include: Power supply cord or

plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been

dropped.

14. No naked flame sources, such as lighted candles, should be

placed on the apparatus.

15. Attention should be drawn to the environmental aspects of

battery disposal.

16. The use of apparauts in tropical and/or moderate climates.

17. CAUTION-Danger of exposion if battery is incorrectly

replaced. Replace only with the same or equivalent type.

BASIC FUNCTION

SWITCHING ON THE UNIT

After connecting the power, press the SOURCE button to turn the unit ON or OFF.

NOTE: In CD/AUX mode, when the unit is not providing the main function for 15

minutes, the unit will automatically switch into standby mode. Press the SOURCE

button to turn on the unit again.

Please note that low volume setting in the audio source may be recognized as "no

audio signal", this will affect the capability of signal detection from the device and

can also originate an automatic switch into standby mode. If this happens please

reactivate the audio signal transmission or increase the volume setting on the audio

source player in order to resume playback.

Electrostatic Discharge hints - The unit may reset or may not reset to normal

operation mode due to electrostatic discharge, just switch it off and reconnect again.

ADJUSTING VOLUME

Press the VOLUME-/VOLUME+ button on unit to increase or decrease volume.

RADIO OPERATION

TUNING RADIO STATIONS

1. Press the SOURCE button on unit to select the FM mode.

2. Tune to desired station by pressing the

band frequency. Example: FM 97.10 MHz.

3. Extend FM TELESCOPIC ANTENNA to its full length and gently move the unit

back and forth to get the best reception, or place the unit in an open location.

4. To turn off the radio, press the SOURCE button to select other functions, or turn

off the unit.

RADIO AUTO SCAN (SEARCH)

Press and hold the REPEAT/SCAN/M.+ button on unit, the unit will conduct an auto

scan until a strong signal is found. The unit will start to broadcast from the P01 after

searching is complete.

RADIO MANUAL PRESET MEMORY OPERATION

You may pre-store 30 (FM) radio stations in memory for your preference.

1. Press the

to select the first desired station, then press MEM./PROG

button on unit, "PROGRAM" indicator will flash on the display.

2. Use REPEAT/SCAN/M.+ buttons to choose the desired sequence you want to

store, then press the MEM./PROG button to confirm.

3. To search another station, repeat steps (1) & (2) until all desired stations stored.

Up to 30 stations can be programmed.

4. To tune to the next preset station, press REPEAT/SCAN/M.+ button.

CD OPERATION

Discs for Playback

This system can playback all digital audio CD, finalized digital audio CD-Recordable

(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs.

LOADING A DISC

1. Press the SOURCE button on unit to select "CD" mode.

2. Open CD door, "OP" will be shown on the display.

3. Place an audio CD into the tray with the front side facing up.

4. Close the CD door, the display will show a flashing "- -", then the playback will

start from the first track.

5. To remove the CD, press MEM./PROG button to stop, then open the CD

compartment lid. Hold the CD by its edges, and take it out carefully.

Note:

1. Make sure the disc is stopped before opening the CD DOOR.

2. To ensure good system performance, wait until the unit completely reads the disc

before proceeding.

3. If no disc loaded into the tray, or the disc is unreadable, the display will show

"NO".

MICROPHONE OPERATION

This unit provides one 3.5mm Mic Jack for Karaoke function. The microphone is

available in all modes. Connect a 3.5mm microphone to the mic jack, then turn on

the microphone.

430.11Xv9ONLINEIB-ENG-072220-A

WARNING:

To reduce the risk of fire or electric shock, do not expose this

appliance to rain or moisture.

CAUTION:

Use of controls or adjustments or performance of procedures

other than those specified may result in hazardous radiation

exposure.

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE

PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of non-insulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

• The apparatus shall not be exposed to dripping or splashing

and that no objects filled with liquids, such as vases, shall be

placed on apparatus.

• Mains plug is used as disconnect device and it should remain

readily operable during intended use. In order to disconnect

the apparatus from the mains completely, the mains plug

should be disconnected form the mains socket outlet

completely.

• Battery shall not be exposed to excessive heat such as

sunshine, fire or the like.

DANGER!

This Compact disc player is classified

as a Class 1 LASER PRODUCT.

THE CLASS 1 LASER PRODUCT

label is located on the rear exterior.

PO Box 2228

BELFAST, BT5 9GD

[email protected]

CONTROLS

on unit, the display will show the

1. HANDLE

2. CD COMPARTMENT

3. TUN. + BUTTON

4. TUN. - BUTTON

5. VOL. - BUTTON

/SOURCE BUTTON

7. REPEAT/SCAN/M.+ BUTTON

8. MEM./PROG BUTTON

9. VOL.+ BUTTON

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).

This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled

or dismantled to minimize its impact on the environment.

For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and

human health due to the presence of hazardous substances.

Getting Started

ACCESSORIES:

Instruction Booklet: 1pc

AC Cord: 1 pc

POWER SOURCE

This unit is designed to be operated on AC or DC power.

AC OPERATION

Plug the tail of AC power cord into AC socket on the unit and the plug

into household AC outlet.

DC OPERATION

Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-2/C

size batteries (not included) into compartment. Please follow correct

polarities as indicated. Disconnect the power supply cable from the

back of unit.

For the Best Possible Performance

• Only use the recommended/supplied batteries or equivalent.

• Rechargeable batteries are to be removed from the unit before being charged.

• The supply terminals are not to be short-circuited.

• Use alkaline batteries for longer life.

• Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries.

• Insert batteries with proper polarity (+/–) as indicated.

• Remove exhausted batteries from product.

• Recharge rechargeable batteries under adult supervision.

• Do not attempt to recharge non-rechargeable batteries.

• Do not open batteries or heat them beyond normal ambient temperatures.

• To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer.

• Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact

with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs,

wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur.

• Store in cool, dry, ventilated area away from hazardous or combustible material.

• Do not dispose of batteries in the household trash or fire.

• Follow applicable laws and local regulations for the disposal and transportation of batteries.

• Do not dispose of batteries in fire; batteries may leak or explode.

• Batteries should be replaced by an adult.

• Remove all packaging before giving to your child.

11 12

10. SPEAKERS

11. STB INDICATOR

12. LCD DISPLAY

13. FM TELESCOPIC ANTENNA

14. BATTERY COMPARTMENT

15. AC SOCKET

16. AUX-IN JACK

17. MIC JACK

18. MICROPHONE

POWER REQUIREMENTS:

Power Source: AC230V ~ 50Hz

DC 9V 1.5V UM-2/C x 6pcs (batteries not included)

PLAYING A DISC

1. The playback starts from track 1, Press the REPEAT/SCAN/M.+ button to pause

playback, the ► indicator and the current track will flash on the display. To resume

playback, press the REPEAT/SCAN/M.+ button again.

2. To stop playback, press the MEM./PROG button, the total number of tracks

appears on the display.

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track

Press the

button on unit while in stop mode, or during playback, until the

desired track appears on the display. It will start to play automatically.

To search for a particular passage during playback (track scanning at high speed)

button on unit to scan the current playing track at high speed

Press and hold the

until desired point (passage) appears, then release the button for normal playback

mode. Playback w ill start again from this point.

PROGRAMMING TRACKS

Programming tracks is possible when playback is stopped. Up to 20 tracks of a CD

can be stored in the memory in any order.

1. In stop mode, press and hold the MEM./PROG button. The unit enters program

setting, the "PROGRAM" indicator will flash on the display and show P01.

2. Press the

button to select the first desired track to be programmed.

(example: track 2)

3. Press and hold the MEM./PROG button on unit to enter. The display would flash

PROGRAM and show P02.

4. Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.

5. Press the REPEAT/SCAN/M.+ button on unit to start playback from the first

programmed track.

6. Press the MEM./PROG button on unit to stop program playback. To clear the

program, you may press MEM./PROG button on unit when the disc stopped and

open the CD compartment lid, the program will be erased.

REPEAT PLAY

You can play one track or all tracks on the disc repeatedly.

To Repeat a Single Track

1. Press and hold REPEAT/SCAN/M.+ button on unit during play, the display will show

a flash "REPEAT" indicator and the current track will be played over and over again

until you press the MEM./PROG button on unit .

2. To cancel repeat play, press REPEAT/SCAN/M.+ button on unit until "REPEAT"

disappears from the display.

To repeat all the Tracks

1. Press and hold REPEAT/SCAN/M.+ button on unit until the "REPEAT" indicator

shows steadily on the display, all tracks on the disc will be played over and over

again till you press the MEM./PROG button on unit.

2. To cancel repeat play, press REPEAT/SCAN/M.+ button on unit until "REPEAT"

disappears from the display.

RANDOM PLAY

Press and hold the REPEAT/SCAN/M.+ button on unit till the "RAN" shows steadily on

the display, the random play will start from next track automatically, until all tracks are

played over and then it will stop. Press the REPEAT/SCAN/M.+ button on unit again

until the "RAN" disappears from the display to cancel.

AUX-IN OPERATION

1. Press the SOURCE button to select "AUX" mode.

2. Insert one end of a AUX line plug into the AUX IN jack (3.5mm) on the unit, and the

other end to the headphone jack of your music device to amplify music.

3. Adjust the volume on the unit or on the device to your desired level.

4. Control play/pause and navigate tracks using your music device.

CD Boombox

ENG

Model: 430 Series

BATTERY

INSTALLATION

DC 1.5V

UM-2 "C"size

DC 1.5V

UM-2 "C"size

OPEN

DC 1.5V

UM-2 "C"size