American Standard Robe Hook 6721 Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Accessories American Standard Robe Hook 6721. American Standard Robe Hook 6721 2. Robe hook, towel ring, tissue paper holder

Stampa la pagina

STANDARD

COLLECTION

ROBE HOOK

TOWEL RING

TISSUE PAPER HOLDER

Thank you for selecting American-Standard...the benchmark

of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

Recommended Tools

10'

Tape Measure

ROBE HOOK, TOWEL RING and TISSUE PAPER HOLDER

MOUNTING & INSTALLATION

The ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) work best if secured to a wall stud or cross brace within the wall,

using the SCREWS (3) supplied.

If the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) is to be installed on a tile or plaster wall the TILE ANCHORS (4)

or DRYWALL ANCHORS (6) and SCREWS (3) should be used.

Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two

mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).

For installations on drywall, use DRYWALL ANCHORS (6) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips

screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush

with the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert SCREWS (3) with #2 Phillips screwdriver.

See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).

For installations on tiled walls, If TILE ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5), then drill

two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (4) flush with face of the finished wall.

Secure MOUNTING PLATE (5) to wall with SCREWS (3).

Install the WALL ESCUTCHEON (7) on the MOUNTING PLATE (5). Place the ROBE HOOK (1), TOWEL RING (2) and

TISSUE PAPER HOLDER (3) over the ESCUTCHEON (7). Secure with MOUNTING SCREW (8). Tighten fully.

Push INDEX BUTTON (9) into ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3). See illustration.

Installation

Instructions

Regular Screwdriver

Drill

Phillips Screwdriver

USE MOUNTING PLATE

AS TEMPLATE

CENTER

LINE

30 TO 72

INCHES FROM

FLOOR

6721

6729

6723

Certified to comply with ANSI A112.18.1

U.S. Patent No. D403,750

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR

WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,

POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.

FINISHED

WALL

M 9 6 8 2 1 6 C