Ekinex EK-GD1-TP-4-HV Manuale di installazione e configurazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione e configurazione per Dimmer Ekinex EK-GD1-TP-4-HV. Ekinex EK-GD1-TP-4-HV 6. Vac 4-channel phase cut dimmers

Stampa la pagina

Dimensions [mm]

Marks

• KNX

• CE: the device complies with the Electromagnetic

Compatibility Directive (2014/30/EU), the Low Volta-

ge Directive (2014/35/EU) and the RoHS 2 Directive

(2011/65/EU).

• Reference Standards: EN 63044-5-1:2019, EN 63044-

5-2:2019, EN 63044-3:2017, EN 62368-1:2020.

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Directive

2012/19/EU (WEEE recast), and cannot

be disposed together with the municipal

undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and

human health. Please be informed about the

correct disposal procedures for waste collec-

ting and processing provided by local authori-

ties.

Document

This technical datasheet refers to the A1.0 release of the

ekinex® device code. EK-GD1-TP-4-HV and is available

for download on the website www.ekinex.com in PDF for-

mat (Portable Data Format).

Product

Application program

code

(## = release)

EK-GD1-TP-4-HV

APEKGDXTPXHV##.knxprod

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

manufacturer at the following address: EKINEX S.p.A.

Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctioning

of the device

• KNX

and ETS

are registered trademarks of KNX As-

sociation cvba, Brussels

documentation without notice.

Communica-

tion objects

(nr. max)

102

Group ad-

dresses

(nr. max)

102