EKM 15IDS Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Strumenti di misura EKM 15IDS. EKM 15IDS 2.
Anche per EKM 15IDS: Istruzioni per l'installazione (2 pagine)
Stampa la pagina
the N port in the meter. If the wire will fit through the provided
centering bushings, then the bushings should be used. These
wires should be passed so that the power flows from bottom of
meter (source side) to the top of the meter (load side). The Neutral
wire will bypass the meter.
3. Tighten down the L wire tap and the N wire tap.
4.Secure the terminal block cover.
Wiring Diagram 2: for EKM-15IDS-N
Both EKM-15IDS and EKM-15IDS-N have 7 digits. Displayed as
99999.99
They also have a pulse output of 800 pulses per kWh
Communications:
For EKM-15IDS-N RS-485: Connect RS-485 A on meter to
RS-485 A on the communication converter. Connect RS-485 b on
meter to RS-485 b on the communication converter. Up to 256 of
these meters can be daisy chain connected to the meter network
on up to 4000 feet of wire.
For a lot more information on installation, communications, and
operation of these meters, please go to this page on the web:
http://www.ekmmetering.com/information/the-complete-guide.html
Warranty:
These meters come with a 2 year warranty.
CE Mark
IEC 62052-11
IEC 62053-21
http://ekmmetering.com – (831)425-7371 – [email protected]
EKM METERING