EKO HF-10S Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Accessories EKO HF-10S. EKO HF-10S 20. Heat flow sensor

3. Safety Information

EKO products are designed and manufactured under the consideration of the safety precautions.

Please make sure to read and understand this instruction manual thoroughly in order to be able to

operate the instrument safely and in the correct manner.

WARNING

CAUTION

3-1. WA RNING/CAUTION



Select an appropriate heat flow sensor for the application. If an indoor type heat flow sensor is used in

an outdoor environment, water may leak into the heat flow sensor and cause disconnections and

abnormal measurement values.



Verify the upper and lower limit of operating temperature and use the heat flow sensor within this

temperature range. If the heat flow sensors are used outside the operating temperature range, it may

cause disconnections and the surface coating may peal apart.



When using the Heat Flow Sensor by attaching it to a measuring surface, measurement error may occur

due to air current contacting the surface of Heat Flow Sensor. Either to embed the Heat Flow Sensor

into the measuring surface as deep as possible, or attach a material with high heat capacity (i.e. rubber

sheet) on the surface. The error ratio becomes large when heat flow rate is small.

EKO INSTRUEMTNS CO., LTD. Heat Flow Sensors Instruction Manual Ver.7

Attention to the user; pay attention to the instructions given on

the instruction manual with this sign.

Pg. 4