Astivita ASTPYROV60 Manuale di istruzioni per l'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Forno Astivita ASTPYROV60. Astivita ASTPYROV60 19.
Stampa la paginaStart-up and use
The first time you use your appliance, heat the empty
GB
oven with its door closed at its maximum temperature for
at least half an hour. Make sure that the room is well
ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly unpleasant
odour caused by protective substances used during the
manufacturing process burning away.
Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
Always place cookware on the racks provided.
During use, we suggest removing any crockery or
delicate foodstuffs from the recesses not in function.
We suggest not opening the door when cooking
foodstuffs which require leavening, so as to not
compromise cooking results.
If the door is subject to repeated jerking, the divider may
come out of its housing. If this happens, the time will
appear on the display. Make sure that the divider is
correctly installed then re-start cooking.
Cooling ventilation
In order to cool down the external temperature of the oven,
a cooling fan blows a stream of air between the control
panel and the oven door.
Once cooking is completed, the cooling fan activates
and deactivates automatically until the oven has cooled
down sufficiently.
Setting the clock
This may only be set while the oven is switched off.
1. Press the
button until the first numerical digit flashes
on the display and the
off.
2. Turn the TIMER KNOB towards + and - to adjust
the hour value.
3. Press the
button again so that the other two
numerical digits on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards + and - to adjust
the minute value.
5. Press the
button again to confirm.
Setting the timer
This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the
button until the
digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards + and - to adjust
the minute value.
,
and
icons are switched
icon and the three
3. Press the
button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
ExtraLarge Space
Starting the oven
1. Select the desired cooking function by turning the
EXTRALARGE SPACE .UNCTION knob. If the
on the display is lit, this indicates that the ExtraLarge
Space has been selected and therefore that only the
settings corresponding to the ExtraLarge Space may be
used.
2. The oven will begin its preheating stage. The
temperature may be changed by turning the
TEMPERATURE knob. The
during the pre-heating stage.
3. Once the pre-heating stage is completed, the
stops flashing (becomes fixed) and a buzzer sounds. It is
now possible to introduce foodstuffs into the oven.
4. During cooking it is always possible to:
- Change the cooking function by turning the
EXTRALARGE SPACE .UNCTION knob.
- Adjust the temperature using the TEMPERATURE knob
(for the universal cooking functions only).
- Set a duration (for universal cooking functions only) and
the cooking end time.
- Stop cooking by turning the EXTRALARGE SPACE
.UNCTION knob to the 0 position.
5. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance will
reactivate the cooking function from the point at which it
was interrupted, as long as the temperature has not
dropped below a certain level. Programmed cooking
modes which have not started will not be restored and
must be reprogrammed.
When using the oven in its ExtraLarge configuration, it
will not be possible to use the Main and Small Space
features: the SMALL SPACE and MAIN SPACE
.UNCTION knobs will be disabled.
Universal cooking functions
All functions have a default cooking temperature which
may be adjusted manually to a value between 40°C and
250°C as desired.
.or the BARBECUE function, the default power level value
is indicated as a percentage (%) and may also be
adjusted manually.
icon
indicator light flashes
icon
7