Donner PATH SEEKER Manuale d'uso
Sfoglia online o scarica il pdf Manuale d'uso per Pedale musicale Donner PATH SEEKER. Donner PATH SEEKER 2.
Stampa la pagina
READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a convenient place for future
reference.
Power Supply
Always use a DC 9V center negative AC adapter. Use of an
adapter other than that specified could damage the unit or cause
malfunction and pose a safety hazard.
Always connect the AC adapter to an AC outlet that supplies the
rated voltage required by the adapter.
Disconnect the AC adapter from the AC outlet when during
lightning storms or not using the unit for an extended period.
Connections
Always turn off the power before connecting or disconnecting.
Make sure to disconnect all cables and AC adapter before
moving the unit. This will help prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the following conditions that could
cause malfunction:
● Extremely hot or cold places
● Under direct sunlight
● Magnetic fields
● Near heaters and other heat sources
● Sandy or dusty places
● Places that are extremely humid or exposed to splashing water
● Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to interference or that emits
powerful electromagnetic waves (e.g. radios and TVs) should not
Precautions
be placed near this unit, as interference could occur.
Electromagnetic interference could cause malfunction and could
corrupt or destroy data.
Always operate this unit at a suitable distance from these
devices.
Handling
Do not apply excessive force to the switches and other controls,
exposing the unit to strong impacts, which could cause it to
break.
Do not put foreign objects or liquids into the unit.
Never open the case or attempt to modify the product in any way
since this can result in damage to the unit.
Clean only with a soft, dry cloth.
www.donnerdeal.com
SEEKER
Owner's Manual
Path Seeker is a dual-mode, fully-functional ABY switcher for amps/pedalboards signal routing. You can route your signal to either A/B
outputs, or feed it to A and B together. Each output channel has independent volume control for signal mixing, and a 0°-180° polarity
toggle is for signal phase correction.
path
Introduction