Astonic Breeze Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Scooter Astonic Breeze. Astonic Breeze 10.

By pressing and holding the minus button, you switch on a walk-along mode. This allows

you to walk next to your bike without having to push.

Stop

The display switches off automatically if there is no operation or rotation of the wheels

for a long time. You can also switch it off yourself, by pressing and holding the "display

on/off" button for a while.

Don't forget to turn off the battery!

M-button

Briefly press the "M" button for information about the trip, such as average speed,

distance travelled in kilometers, total distance, and so on.

Want to charge your smartphone? Press and hold the "M" button until a cord symbol

appears on the display. You have now enabled the USB port. You can plug your phone

into the bottom of the display so that it gets power from your battery. Press and hold the

"M" button again to turn off the charging function.

Press the "M" button twice in quick succession, then you will enter the settings. Please

do not change anything in these settings! If you do, you will lose your warranty!

In some cases, the motor may get too hot. This happens if you drive through loose sand

or mud in too high a gear. Put your gear (right side of your handlebars) in loose sand or

mud at its lowest position at all times. If signal "Motor needs attention" appears, switch

off the display and battery in its entirety. Wait a few minutes to cool the motor before

turning the battery and display back on.

If there are any questions or uncertainties, please feel free to contact us. If you want to

make changes in the level of pedal assistence, of course we are happy to help.

Page 5