Astonica 50100230 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per interni Astonica 50100230. Astonica 50100230 2. 60'' patio table

PARTS & HARDWARE LIST

PART #

DESCRIPTION

Glass Table Top

Connector Ring

Table Leg

Bolt, Long

Bolt, Short

Lock Washer

Allen Wrench

Plastic Bolt Caps

Touch Up Paint

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Caution: Do not over tighten fasteners.

QUANTITY

FIGURE 1

1. Unpack all parts and remove packing material on non-scratching surface.

2. Place table top (A) upside down on a flat, non-abrasive surface. (SEE FIGURE 1).

Caution: Placing table top and legs on a hard surface may scratch

table glass and damage table rim and legs.

3. Attach each table leg (C) to edge of the table top (A) with short bolt (E) and

lock washer (F), finger tighten only.

4. Attach each leg (C) to connector ring (B) using long bolt (D) and lock washer (F).

Insert each bolt through connector ring into table leg from the inside and

finger tighten only.

5. Secure connector ring to table legs. First, tightened each bolt (D) two revolutions

at a time, alternating between bolts in a cross corner fashion (X). Once center

connector ring is in position, tighten table top bolts (E) using Allen

Then, tighten bolts (D) into connector ring using Allen

6. Carefully turn the table frame assembly to the upright position onto it legs

and securely tighten all bolts.

7. Place plastic bolt caps (H) over each bolt (D) and (E).

Note: Retain touch up paint (I) for future use.

ASSEMBLY INSTRUCTIONS

wrench (G).