Akuvox R29X Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Controllori di accesso IP Akuvox R29X. Akuvox R29X 2. Rain cover

R29X

Rain Cover Installation Guide

1. On-wall installation

Combine the wall-mounting box with the rain

cover and mark the six mounting hole positions

on the wall. Drill the holes and insert the six

plastic wall anchors into the holes according to

regular device installation requirement. Then

tighten the combined rain cover and the box

securely on the wall using the six tapping

screws (ST4x20).

Install the device on the wall-mounting box ,

press down the device and make sure that the

two hang holes on its top are fully hanged on

to the two square hooks on the top of the box,

then tighten the two countersunk machine

screws (M3x6) underneath the device using

the Allen wrench attached with the device.

If the device cannot be easily hanged on to the

square hooks, loosen the six cross screws

(ST4x20) slightly, move up the rain cover a

little bit to increase the clearance between the

rain cover top and the box top. Then retighten

the six screws before installing the device.

Installation completed.