Astonica Calavino Square Manuale di istruzioni - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per interni Astonica Calavino Square. Astonica Calavino Square 2. 60'' patio table
Stampa la pagina
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Glass Table Top
B
Connector Ring
C
Table Leg
D
Bolt, Long
E
Bolt, Short
F
Lock Washer
G
Allen Wrench
H
Plastic Bolt Caps
I
Touch Up Paint
A
B
D
E
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
C
F
G
H
FIGURE 1
1
1
4
8
4
12
1
12
1
E
F
1. Unpack all parts and remove packing material on non-scratching surface.
2. Place table top (A) upside down on a flat, non-abrasive surface. (SEE FIGURE 1).
Caution: Placing table top and legs on a hard surface may scratch
table glass and damage table rim and legs.
3. Attach each table leg (C) to edge of the table top (A) with short bolt (E) and
I
lock washer (F), finger tighten only.
4. Attach each leg (C) to connector ring (B) using long bolt (D) and lock washer (F).
Insert each bolt through connector ring into table leg from the inside and
finger tighten only.
5. Secure connector ring to table legs. First, tightened each bolt (D) two revolutions
at a time, alternating between bolts in a cross corner fashion (X). Once center
connector ring is in position, tighten table top bolts (E) using Allen
Then, tighten bolts (D) into connector ring using Allen
6. Carefully turn the table frame assembly to the upright position onto it legs
and securely tighten all bolts.
7. Place plastic bolt caps (H) over each bolt (D) and (E).
Note: Retain touch up paint (I) for future use.
ASSEMBLY INSTRUCTIONS
D
F
B
A
C
C
F
E
F
wrench (G).
®
wrench (G).
®