DAB ACTIVE DRIVER T/T 3.0 Manuale di programmazione

Sfoglia online o scarica il pdf Manuale di programmazione per Controllore DAB ACTIVE DRIVER T/T 3.0. DAB ACTIVE DRIVER T/T 3.0 10.

ACTIVE DRIVER

INTRODUCTION

The DAB ACTIVE DRIVER is an innovative integrated pump control system that utilizes a

variable frequency drive controller (VFD) to provide CONSTANT PRESSUE regardless of the

demand flow requirements.

>Applications

The DAB ACTIVE DRIVER will fit to most DAB domestic pump, specifically Jet, JINOX, JECOM,

EURO, EUROINOX, EUROCOM, K Series and KVCX Vertical Multistage.

The unit is available if the following configurations,

ACTIVE DRIVER M/M 1.1

Suits single phase 230v power supply, and will couple to single phase pump units up to

1.1kW, and is programmable to a maximum pressure of 6 Bar (600kPa), not exceed a

flow of 300lpm.

ACTIVE DRIVER M/T 1.0

Suits single phase 230v power supply, and will couple to three phase pump units up to

1.0kW, and is programmable to a maximum pressure of 9 Bar (900kPa), not exceed a

flow of 300lpm.

ACTIVE DRIVER M/T 2.2

Suits single phase 230v power supply, and will couple to three phase pump units up to

2.2kW, and is programmable to a maximum pressure of 9 Bar (600kPa), not exceed a

flow of 300lpm.

25/9/08

INVERTER

CONTROLLED