Doorentryonline K401-IE Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Tastiera Doorentryonline K401-IE. Doorentryonline K401-IE 12. Stand-alone keypad & proximity card reader

Stampa la pagina

Function Description

Relay operation (Pulse mode and Toggle mode)

Both relays can operate in Pulse Mode (suitable for access control) or Toggle Mode (suitable for

arming/disarming alarms, switching lights, machines....etc)

Every time a valid card/fob is presented or a Pin input is made in Pulse Mode, the relay will operate, for the

pre-set relay pulse time

Every time a valid card/fob is presented or a Pin input is made in Toggle Mode, the relay changes state, which

will not revert until a valid card/fob is re-presented or a Pin input is re-made

Anti Tamper Alarm

The K401-IE uses an LDR (light Dependent Resistor) as an anti tamper alarm. If the keypad facia is removed,

or a sudden change in light source, the tamper alarm will bleep constantly

PROGRAMMING

Programming will vary depending on access confirguration. Follow the instructions according to your access

configuration

Programming 1 -------------------- Configure the K401-IE

Change the configure settings according to your application (optional). Multiple configuration settings can be

changed at one time: enter program mode, change the desired settings, then exit program mode

Set Master Code

The 4 digit Master Code is used to prevent unauthorized access to the system. To interface with the K401-IE,

the manager will need a Master Code (factory default code: 6666). We recommend immediate update and

recording of your Master Code

Programming Step

1. Enter Program Mode

2. Update Master Code

3. Exit Program Mode

– Please the last page for this

Keystroke Combination

﹡(Master Code) #

（New Master Code）#（Repeat New Master Code）#