DoorHan DCUH-3 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo DoorHan DCUH-3. DoorHan DCUH-3 16. Control unit for electrohydraulic dock leveler with hinged lip
Anche per DoorHan DCUH-3: Manuale (12 pagine)

Stampa la pagina

Table 6.1.2. LCD display indication in DCUH-2 mode

Dock equipment

Dock leveler

In DCUH-3 mode each operation of the door and dock leveler is displayed on the menu screen accordingly (see Ta-

ble 6.1.3).

Table 6.1.3. LCD display indication in DCUH-3 mode

Dock equipment

Door

Dock leveler

If it is time to perform maintenance, the operation indica-

tion is blocked, the SEr message is constantly displayed

on the menu screen and the service led is lit. In order to

remove a service tick enter the advanced programming

menu. The same applies to the faults indication: if a fail-

6.2. TO ENTER PROGRAMMING MENU

In order to enter the programming menu turn the main

power switch ON. Make sure the power indicator is lit, then

press and release the RAISE button. After that press the P

and RAISE buttons simultaneously and hold for 5 seconds.

Table 6.2.1. Parameters of the DCUH-2 programming menu

Message

Parameter value 1–9 — 3–11 sec.

1. UH

Default value — 7 sec.

Change of value by 1 equals 1 sec.

Parameter value 1–9 — 5–21 sec.

2. UC

Default value — 13 sec.

Change of value by 1 equals 2 sec.

Parameter value 1–9 — 2,5–6,5 sec.

3. Hd

Default value — 4,5 sec.

Change of value by 1 equals 0,5 sec.

Parameter value 1–9

4. AF

(Y/n), default value — Y

5. Ar

6. CXX

7. SXX

8. EXX

(Y/n), default value — n

9. rS(1)

Menu screen message

Setting option

(0–99)

PUP

Pdn

GUP

Gdn

GSt

PUP

Pdn

ure occurs during operation, EX message will be displayed

before the system is de-energized, where X is the fault

number. The number of the last fault may be viewed in the

advanced programming menu.

Flashing UH message on the menu screen confirms you

have successfully entered the programming menu.

Description

Time period in which hydro station motor stops during leveler

Leveler lowering time in auto parking mode

Leveler raising time at the last stage of parking

Operating threshold of the leveler stop function during leveler rais-

ing mode only

Activation of auto parking function

Cycles counter / 1000

Service counter

Indication of the last equipment failure:

E00 — no equipment failures during the whole period of operation;

E01 — usage error;

E03 — short circuit in hydraulic station motor winding;

E04 — control board short circuit

Reset of service mode

Operation

Leveler rising

Leveler lowering

Operation

Door rising

Door lowering

Door stopping

Leveler rising

Leveler lowering

raising