Astralpool NARBONNE Manuale di installazione e manutenzione - Pagina 8
Sfoglia online o scarica il pdf Manuale di installazione e manutenzione per Apparecchiature di illuminazione Astralpool NARBONNE. Astralpool NARBONNE 19. Above-ground automatic pool cover
Stampa la pagina
ENGLISH
SLATS ASSEMBLY
* Immediately after taking the slats out of the packaging, they should be put into the
water to prevent any possible deformation.
*The number of slats has been determined according to the length of the pool,
though there are 4 extra slats.
* The first set of slats is easily recognisable as it has the straps to be fastening to the
roller. (Long length straps).
Fixation plate
Strap
st
1
slate
st
1
set of 7 slats
*Slide the strap under the fastening plates; tension it without pulling the slat out of the
water
*Centre the cover in the pool leaving enough space on both sides.
*Tighten the attachment plates with a screwdriver
* Bring closer the set of 7 slats to assemble them.
Note: Slats should go down from the front of the roller shaft.
7/17
Revision number B-007-2012-10-05