Canon PIXMA MP610 Series Manuale di servizio - Pagina 6
Sfoglia online o scarica il pdf Manuale di servizio per Stampante All in One Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45. All-in-one photo inkjet printer
Anche per Canon PIXMA MP610 Series: Inizia qui (2 pagine), Manuale supplementare (6 pagine), Opuscolo e specifiche (2 pagine), Manuale di avvio rapido (40 pagine), Manuale di avvio rapido (2 pagine)
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
MP610
2. LIST OF ERROR DISPLAY / INDICATION
Errors and warnings are displayed by the following ways:
1. Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in
text and by icon.
2. Messages during printing from a computer are displayed on the MP driver Status Monitor.
3. Error codes are printed in the "operator call/service call error record" area in EEPROM information print
Buttons valid when an operator call error occurs:
1. ON/OFF button: To turn the machine off and on again.
2. OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the
cause of the error is eliminated, and pressing the OK button may not be necessary.
3. Stop/Reset button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
Error
No paper in the rear
tray.
*1
No CD / DVD tray
.
*1
No CD or DVD
.
No paper in the cassette. [1003]
Paper jam.
Paper jam in the rear
guide.
Paper jam in the under
guide.
Ink may have run out.
Ink tank not installed.
Print head not installed,
or not properly
installed.
Print head temperature
sensor error.
Faulty EEPROM data
of the print head.
Inner cover error.
Error
U
Message on the LCD
code
No.
[1000]
---
Rear tray.
There is no paper. Load paper and
press [OK].
[1001]
---
There is no CD-R tray. Attach the
tray and press [OK].
[1002]
---
Printable disc is not set. Correctly
place a disc in the CD-R tray and
press [OK].
---
Cassette.
There is no paper. Load paper and
press [OK].
[1300]
---
The paper is jammed. Clear the
paper and press [OK].
[1303]
---
[1304]
---
[1600] U041 The following ink may have run
out. Replacing the ink tank is
recommended.
[1660] U043 The following ink tank cannot be
recognized.
(Applicable ink tank icon)
[1401] U051 Print head is not installed. Install
the print head.
[1403] U052 The type of print head is incorrect.
Install the correct print head.
[1405]
*2
---
Inner cover is open. Close the inner
[1841
,
*2
cover and press [OK].
1846
,
*1
1851
,
*1
1856
]
*1
---
Open the inner cover, place the CD-
[1850
,
*1
R tray and press [OK].
1855
]
Confirm that the rear tray is selected as the paper
source. Set the paper in the rear tray, and press the
OK button.
Set the CD / DVD tray, and press the OK button.
Set a CD or DVD in the CD / DVD tray, and inset
the CD / DVD tray in the proper position. Then,
press the OK button.
Confirm that the cassette is selected as the paper
source. Set the paper in the cassette, and press the
OK button.
Remove the jammed paper, and press the OK
button.
Replace the applicable ink tank, or press the OK
button to clear the error without ink tank
replacement. When the error is cleared by pressing
the OK button, ink may run out during printing.
Install the applicable ink tank(s) properly, and
confirm that the LED's of all the ink tanks light
red.
Install the print head properly.
Re-set the print head. If the error is not cleared,
the print head may be defective. Replace the print
head.
Close the inner cover, and press the OK button.
Open the inner cover which functions as the CD /
DVD tray feeder, set the CD / DVD tray in the
4 / 43
TABLE OF CONTENTS
Solution