Canon PIXMA MX722 Manuale di configurazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di configurazione per Stampante All in One Canon PIXMA MX722. Canon PIXMA MX722 31. Getting your multifunction back on your network after a router or network change
Anche per Canon PIXMA MX722: Installazione semplice (2 pagine), Manuale introduttivo (4 pagine), Manuale di configurazione della rete (16 pagine), Manuale di connessione (10 pagine)

Wireless Connection

a Preparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, a button on the Operation Panel (A) is lit.

•

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to. For details on how to check the settings, refer to the manual supplied with the router or contact its manufacturer.

The confi guration, router functions, setup procedures and security settings of the network device vary depending on your

•

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.

•

If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11n only."

•

For offi ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

•

data such as your personal information to a third party.

•

This printer cannot be used over wireless and wired connections at the same time.

•

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

b Printer Setup

1. Press the MENU button (A) on the printer.