Canon PIXMA MX922 Impostazione della connessione - Pagina 2

Sfoglia online o scarica il pdf Impostazione della connessione per Stampante All in One Canon PIXMA MX922. Canon PIXMA MX922 15. Getting your multifunction back on your network after a router or network change
Anche per Canon PIXMA MX922: Installazione semplice (2 pagine), Manuale di configurazione (31 pagine), Manuale di configurazione della rete (21 pagine), Impostazione (29 pagine), Manuale rapido (22 pagine), Manuale (20 pagine)

Connecting to the Network

If any of the following situations exist

•You have replaced your Router or Access Point

•You want to use a different wireless network

•Router settings have been changed.

Please complete the following steps to apply the new configuration settings to your multifunction.*

*The procedure to reconfigure the printer will cause a new instance or listing of the printer in Print & Fax or Print & Scan. To avoid

possible confusion it is recommended to delete the printer listing prior to performing the reconfiguration procedure.

Click here for

instructions.

1. To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the

settings on the Multifunction need to be changed. If you saved a copy of the setup file when you originally installed your printer you can

use it to run the setup. This file, "Mac-mx920-1_0-mcd.dmg" is located in the Downloads folder. Double-click the file, then the setup icon

to start the installation.

If you did not save the file to your computer when the printer was first installed, you can use the Setup CD-ROM to install. You will be

installing the printer the same way as the initial install.

Click here to access the Initial Setup Instructions.