Canon Vizcam 1000 Specifiche tecniche - Pagina 4
Sfoglia online o scarica il pdf Specifiche tecniche per Stampante All in One Canon Vizcam 1000. Canon Vizcam 1000 4. Brochure
SPECIFICATIONS
CAMERA
Pickup Device:
Total Pixels
Effective Pixels
Horizontal Resolution
Vertical Resolution
Synchronization
White Balance
Electronic Shutter Speed
Gain Control
Negative Conversion
OUTPUT SIGNALS
Video Signal Composition
Video Output Impedance
Video Output Signal Level
Stereo Audio Output
Impedance (R,L)
STEREO AUDIO INPUT SIGNALS
Microphone Input
Input Impedance
LENS
Focal Length
Focus
Normal Aperture Ratio
Zoom
Iris Control
VIEW ANGLE
Nominal Angle of View
(Designed Value)
VIZCAM'S CONTROL PANEL FEATURES USER-FRIENDLY FUNCTIONS:
Power On/Off
AGC Lock On/Off -
Lock the image
brightness level or
adjust brightness
automatically.
Negative/Positive
Button - Negative film
material can be
converted and viewed
as a positive image
Audio Mute On/Off -
when captured with
When an auxiliary
the camera with the
microphone is connected
negative/positive
to the camera the sound
switch active.
can be active or muted.
1/4" CCD
410,000
380,000 492 (V) x 768(H)
450 TV lines (at Center)
350 TV lines (at Center)
Internal Synchronization (2:1 interlaced)
Auto or Manual Adjustment
1/60, 1/100
Auto/Lock
Available
NTSC standard color video signal: RCA pin jack (yellow)
Y/C separate signal: S (Y/C separation) terminal
75 Ohms
1Vp-p (luminance signal)
(Audio Mute switch available)
1 k ohm approximately RCA pin jack
Minijack ø 3.5mm
5 k ohm approximately (No microphone power)
2.9 mm
Manual (8mm ~ infinite)
F2.8
Fixed
Manual (F2.8 ~ F16)
Horizontal 63 degree 39'
Vertical 49 degree 56'
Diagonal 75 degree 33'
White Balance Adjust Knob -
for correct color
reproduction.
Auto White Balance Button (On/Off) - The auto white balance feature
of the camera will automatically try to produce accurate color reproduction
of images being captured. Basically the camera will try its best to
accurately reproduce clear accurate whites, reds, blues, and greens.
All specifications subject to change without notice. Canon is a registered trademark of Canon, Inc. ©1997 Canon USA, Inc.
MOVABLE CAMERA ANGLE
Pan Angle
Tilt Angle
Rotatable Camera Head
DOCUMENT SIZE
Min:
Max:
CONTROL SWITCHES
Power On/Off Switch
White Balance Adjust Knob
Auto White Balance On/Off
Negative/Positive Switch
Audio mute On/Off
AGC Lock (On/Off)
Electronic Shutter Switch
DISPLAY LAMPS
Power Lamp
White Balance
Audio Mute
AGC Lock (On/Off)
POWER
Input Power
Power Consumption
OTHER SPECIFICATIONS
Operating Temperature
Operating Humidity
Stored Dimensions
Weight
Accessories
Certification
RF Emission
Due to variable lighting conditions
it might be best to manually
adjust the white balance to
reproduce clear accurate
color reproduction.
By placing the
Auto WB in the
off position the
user can then
manually adjust
For purchase and technical assistance call 516-328-5960.
For literature and the dealer nearest you, call 1-800-OK CANON.
Plus or minus 90 degree, pivot on the base
3 joint arm
Greater than 180 degrees
Postage Stamp Size
Letter Size (8 1/2" x 11")
Black Seesaw Switch
Volume Knob
Alternative On/Off Control
Alternative On/Off Control
Alternative On/Off Control
Alternative On/Off Control
Slide Switch
Green Led
Green Led
Green Led
Green Led
12 VDC
AC adapter PA-V6 120VAC/60Hz
7W
41° F -95° F
20%-85%
6"(w) x 15"(H) x 8.5"(D)
Approximately 5 Ibs.
AC adapter (PA-V6) x1
Pin Cable x1
UL1310 (only for AC adapter)
FCC Class B
Electronic Shutter Switch -
Is utilized if there is problems
with screen flicker. The
switch should be set to
the appropriate power
should leave the switch
set to 1/60).
- In areas with 50 hz
power: Set the selector
to 1/100.
E-mail us at: [email protected]
Visual Communication Systems Division
frequency where
the camera is
installed.
- In areas with
60 Hz power:
Set the selector
to 1/60. (US users