Canon 9540A003 - Optura 400 Camcorder Manuale di istruzioni - Pagina 21

Sfoglia online o scarica il pdf Manuale di istruzioni per Videocamera Canon 9540A003 - Optura 400 Camcorder. Canon 9540A003 - Optura 400 Camcorder 45. Digital video software (windows) ver.13 instruction manual

Stampa la pagina

Connecting the Camcorder to a Computer

❍

menu and select [SYSTEM]. Select [

to [STANDARD] and close the menu.

❍ Make sure the camcorder is being powered using the power adapter

before connecting it to a computer.

❍ Be sure to install the Digital Video Software before you connect the

camcorder to the computer.

❍ Connect the USB cable directly to one of the computer's main USB

ports. The interface may not function correctly if the camcorder is

connected via a USB hub.

❍ The connection may not operate correctly if you are using other USB

devices, excluding USB mice or keyboards, at the same time. If this

occurs, disconnect the other devices from the computer and try

reconnecting the camcorder.

❍ Do not connect two or more camcorders to the computer. The

camcorders may not operate normally.

❍ Never allow the computer to go into standby (sleep) mode while a

camcorder is connected via the USB interface.

❍ Refer to your computer manual for the location of the computer's USB

ports.

❍ See your camcorder instruction manual for connecting instructions.

Insert a memory card containing images into the camcorder.

Connect the power adapter to the camcorder.

Turn the POWER switch to PLAY (VCR) and move the TAPE/

CARD switch to CARD.

Wait until the card access indicator stops flashing.

Attach the supplied USB cable to the computer's USB port

and the camcorder's USB Terminal.

• The first time you connect the camcorder to the computer:

- Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or

the DV WIA Driver (Windows Me) starts.

- If the "Digital signature not found" message appears, click [Yes].

- After a few moments, a message such as "New Hardware Found"

appears and the driver will be installed automatically.

- If you are prompted to restart the computer, restart the computer.

• Windows 98/Windows 2000/Windows XP: A window appears allowing

you to select an application program to start.

Windows Me: The Scanners and Cameras Wizard starts. Click [Cancel] to

close the Wizard.

Make sure the camcorder is set to [STANDARD]. Open the

CONNECT], check that it is set