Amerlux MESA Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apparecchiature di illuminazione Amerlux MESA. Amerlux MESA 5. Gyp board ceiling
Stampa la paginaAMERLUX
LIGHTING SOLUTIONS
2. Assembling Continuous Rows-
1: Slide housings together. Slide alignment splines and Pins into cavities in extrusion. Slots on braces should align.
2: Secure fixtures together with 10-24 Hex Head Screws & 10-24 Keps Nuts (By Amerlux)
2.Feeding Continuous Rows-
2
4
1
1: Tip/Tilt appropriate Perforated Panel into
fixture with clips open (As Seen Here)
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
R
ADAPT. ABILITY.
Alignment Pin
3: Tighten Screws on Alignment Spline
3
1: Splice 12" BX (Supplied by Amerlux) into
beginning fixture via K.O. on access plate
2: Remove access plate from mating fixture.
3: Remove wire nute from mating fixture.
4: Splice in BX to mating fixture according to
5: Secure access plate to mating fixture.
3.Installing Perforated Panels
www.amerlux.com
INSTALLATION INSTRUCTIONS
TM
SHEET #:
689-0353
10-24 Hex Screw
Alignment Spline
code.
2: Swivel tabs into slot in extrusion to lock.
(As Seen Here)
Sheet 2 of 5
5