AmerTac Westek BL-BUTN-W Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Illuminazione domestica AmerTac Westek BL-BUTN-W. AmerTac Westek BL-BUTN-W 2. Compact bar light

CAUTION: Be cautious of what surface the adhesive is attached, as it may

remove paint or damage surface.

Mounting with double-sided 3M adhesive tape

1. Locate the two tape pieces in your package. Peel and remove one side

of the tape backer to expose adhesive and firmly attach to the indented

squares on back of light bar.

2. Make sure the area where you want to attach the light is clean and clear of

debris and dust.

3. Peel and remove the other sides of tape backer and place the light bar in

the desired mounting location. Firmly press the adhesive tape against your

surface to mount the light.

Mounting with screws

1. Remove the back of light by sliding the cover in the direction of the

"open" arrow.

2. Use the two holes in the back as a guide to drill pilot holes.

3. Secure the back to your mounting surface with included

screws – do not overtighten.

Limited Warranty

Under normal use and conditions, AmerTac provides to the original purchaser of this

product a one year limited express warranty that is set forth in the Limited Warranty

stated in full at www.amertac.com/warranties. The Limited Warranty is in lieu of all other

express or implied warranties or liabilities subject to the exceptions explained fully in the

Limited Warranty on the website.

250 Boulder Dr.

Breinigsville, PA 18031

610-336-1330

www.amertac.com

Made in China

BO_TL_049_0321