Flycam HD-5000 Manuale di istruzioni - Pagina 9
Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories Flycam HD-5000. Flycam HD-5000 11. Video stabilizer
Anche per Flycam HD-5000: Manuale di istruzioni (16 pagine), Manuale di montaggio (10 pagine)
Stampa la pagina
FLYCAM HD HA NDHELD VIDEO STABILIZER
Check to see if your camera is sitting level. If not, repeat the necessary steps until it does.
Practice walking/movements ensuring your body motion is not transmitted to your hands
and then the FLYCAM and camera.
H O L D I N G Y O UR F L Y C A M H D V I D E O S T A B I L I Z E R
When handling your Flycam HD Handheld video Stabilizer one hand holds onto the handle while
the other is used to gently guide the camera in the direction you wish to shoot and frame the
shot. For normal shooting, hold the handle in the middle.
For shots that require framing the camera up, down or sideways, hold the handle firmly at the
bottom.
This will allow the "yoke" part of the gimbal to rotate without hitting your hand or knuckles.
M A I N T E N A N C E
Bearing Maintenance
The main Bearing on your Flycam HD Handheld Stabilizer is attached to the Central Post about
two inches from the top. It is of metal construction and partially enclosed by the Bearing
assembly.
If after a period of time your bearings don't turn smoothly, lubricate with a minimum of light
machine oil. Light lubricating oil can also be used on the Yoke and Handle Bearings.
Be sure to keep oil away from your camera, & clean up any over spill.
Cleaning
Do not use solvents or harsh cleaners of any kind on your Flycam HD Hand held video stabilizer. If
the unit becomes dirty, use a damp soft cloth or sponge and a mild detergent to gently clean
external parts.
NOTE: Flycam HD Handheld video Stabilizer doesn't work under water, nor is it waterproof. Avoid
direct exposure to rain, water spray or any harsh environment. The bearings are not sand proof.
Avoid getting dirt or sand in them.
9