Canon VIXIA HFR60 Manuale - Pagina 28
Sfoglia online o scarica il pdf Manuale per Videocamera Canon VIXIA HFR60. Canon VIXIA HFR60 29. Using an ios/android device to control the camcorder from another location after setting it up in your home (remote control+streaming)
Anche per Canon VIXIA HFR60: Come iniziare (2 pagine)
Stampa la pagina20. Camcorder: To end the Monitor while Out mode, touch [End] to end the wireless connection and
then turn off the camcorder.
NOTE
For details about CameraAccess plus, please refer to the following site.
•
http://pixela.jp/cermc
When the camcorder is in Monitor from Home or Monitor while Out mode, the shooting mode
•
will be set automatically to
Even if the frame rate was set to 24P, video recorded in Monitor from Home or Monitor while
•
Out mode will be recorded at 30P.
This function is not available in the following cases.
•
- When the video quality is 60P.
- When
>
> [Dual recording] or [Relay recording] is activated.
Depending on the connection and the strength of the wireless signal, there may be interruption
•
in the live video image or the response may be slow.
About the optional CT-V1 Camera Pan Table
- If you mount the camcorder on the optional CT-V1 Camera Pan Table, you can use the CameraAccess
plus app on your iOS/ Android device as a remote control to move the camcorder sideways (panning) in
addition to starting/stopping recording.
- Notice that there are two possible directions for mounting a camcorder on the CT-V1. This camcorder
should be mounted so that the lens is aligned with the
camcorder base plate. For details, refer to the instruction manual of the CT-V1.
.
mark on the underside of the CT-V1s