Flycolor Fairy Series Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Flycolor Fairy Series. Flycolor Fairy Series 2. Multi-rotor brushless esc

Stampa la pagina

Thank you for purchasing our brushless electronic speed controller (ESC) . Any Improper operation may cause personal injury damage to the product and related equipments. This

high power system for RC model can be dangerous ,we strongly recommend reading the user manual carefully and completely. We will not assume any responsibility for any losses

ATTENTION

caused by unauthorized modiﬁcations to our product. We have the right to change the design, appearance, performance and usage requirements of the product without notice.

Main features

●Support OneShot 125.

●High performance MCU.

●

Outstanding blocking protection, protect equipment and personal safety.

●Optimized ﬁrmware is specialized for FPV racing motor, excellent compatibility.

●The ﬁrmware is specialized for multi-rotor , fast throttle response during ﬂying.

●Strong self-adaptable ﬁrmware, 4 timing options.

●Suppor t frequency of throttle signal to 500Hz max , compatible with various kinds of ﬂight control. ( ≥500Hz throttle signal is nonstandard signal )

Speciﬁcations

Model

Manufacture Model

Fair y-6A

S-FW006004

Fair y-10A

S-FW010004

Fair y-12A

S-FW012004

Fair y-15A

S-FW015004

Fair y-20A

S-FW020004

Fair y-30A

S-FW030004

Fair y-40A

S-FW040006

Fair y-50A

S-FW050006

Wiring diagram

*Please ensure all solder joints are insulated with

heat shrink where necessary.

Battery

peration instructions

Normal star t-up Process

Turn on the transmitter, move the throttle

stick to the bottom position.

Set Throttle Range

Turn on the

transmitter,

move the

throttle stick to

the top position.

Set Timing

Turn on the

transmitter,

move the

throttle stick

to the top

position.

( When motor emits tone times ≥5 times, long " Beep--" will represent 5 times)

When ESC drives disc type motor with accelerating throttle , motor may be out-of-step ,stalling or requires higher speed , you could try to change timing

( factory default value is 22.5°). Higher timing can accelerate motor speed, but also cause more heat. After changing timing, please test on the ground before

ATTENTION

ﬂying.

Protections

ESC will cut off output if it fails to star t the motor within 3 seconds by accelerating throttle. you need to move the throttle stick back to the bottom position

Star t-up

and restar t the motor.( The possible causes : Bad connection or disconnection between ESC & motor , propellers are blocked, etc)

Protection

ESC will cut off power or output when the load suddenly increases to a very high value, normal operation will resume after moving the throttle stick to the

Over-load

bottom position. ESC will automatically try to restar t when ESC and motor are out-of-step.

Protection

When ESC detects the loss of throttle signal for over 0.32 seconds, it will cut off power or output immediately to avoid an even greater loss caused by the

Throttle Signal

Loss Protection

continuous high speed rotation of propellers. ESC will resume the corresponding output after the normal signal is restored.

When the motor / blade due to contact with foreign objects blocking, ESC will stop immediately, to prevent the high-speed rotation of the blade caused

Blocking

personal injury. (when the throttle is less than 10%, the protection is invalid).

Protection

Trouble shooting

Trouble

ESC was unable to

star t the motor

ESC was unable to

star t the motor

ESC was unable to

"Beep-beep,beep-beep-beep,...Beep--beep--"

star t the motor

Multi-Rotor Brushless ESC

●Mini size, lighter in weight.

Burst Current

Con. Current

(10S)

10A

15A

12A

18A

15A

20A

30A

40A

50A

60A

Receiver

Connect ESC & battery packs, wait for 2 seconds, motor emits continuously 1 long and 1 shor t tone.

It means the ESC is ready for working.

Connect the receiver to

Wait for 2 second, after

the battery, ensure the

motor emits 2 shor t "BEEP-

communication is normal

B E E P " , m o v e t h e t h r o t t l e

between the transmitter

stick to the bottom position

and receiver, then power

in 3 seconds.

on the ESC.

Connect the receiver

to the battery, ensure

The motor will

the communication is

emit different

normal between the

tone circularly.

transmitter and

receiver, then power

on the ESC.

Warning Tone

"Beep beep beep..."

continuous urgent shor t tone

"Beep,beep,beep..."

shor t inter val tone

Circular tones

User Manual

(Fairy series ESC)

LiPo cells

BEC

5V/1A

2-4S

5V/1A

2-4S

5V/1A

2-4S

5V/1A

2-4S

5V/1A

2-4S

5V/1A

2-4S

2-6S

ESC

Wait for 2 seconds, motor emits continuously

1 long and 1 short tone. It means the ESC is

ready for working.

"Beep-beep-"Throttle rage;

"Beep-beep-beep-" 15° timing

"Beep-beep-beep-beep-"18.75° timing

"Beep--" 22.5° timing

"Beep--beep-" 26.25° timing

Possible Cause

The throttle stick is not at the bottom

position or throttle range is too small.

No output signal from the throttle

channel on the receiver.

The"Normal/Reverse"direction of the

throttle channel on transmitter is incorrect.

ADD: 5th Floor,C2 Building, Jiaan Industrial Park,Zone 72,Baoan District, ShenZhen

TEL：0755-86321853

FAX：0755-86321852

Web: www.flycolor.net

Email: [email protected]

series ESC

Size

Weight

(Excluding Plugs)

6.7g

28x13x5mm

8.6g

28x15x6mm

9.5g

28x15x6mm

9.5g

28x15x6mm

10g

28x15x6mm

11g

28x15x6mm

15g

40x21x7mm

16g

40x21x7mm

Motor

ATTENTION

Move the throttle stick to the

bottom position in 3 seconds

after hearing corresponding

tone, the setting will be

completed.

Solution

Move the throttle stick to the bottom position or reset the throttle

range.

Check if the communication is normal between transmitter and

receiver; Check throttle channel connection well.

Refer to the transmitter instruction and adjust the setting of

"Normal/Reverse"direction of the throttle channel.

Typical Applications

(For reference)

170-250 Multi-Rotor

170-280 Multi-Rotor

170-330 Multi-Rotor

170-450 Multi-Rotor

450-850 Multi-Rotor

650-1000 Multi-Rotor

Please set throttle range,

when ﬁrst time to use ESC

or change transmitter.

Wait for 2 seconds, motor

emits continuously 1 long

and 1 short tone. It means

the ESC is ready for working.

251400-1027,EN,V1.7