Canon 0106B001 - Flatbed Scanner Unit Manuale di avvio facile

Sfoglia online o scarica il pdf Manuale di avvio facile per Scanner Canon 0106B001 - Flatbed Scanner Unit. Canon 0106B001 - Flatbed Scanner Unit 2. Cannon scanner user manual

Stampa la pagina

Easy Start Guide

Thank you for purchasing the Canon imageFORMULA DR-2580C.

This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the

procedures outlined in this Easy Start Guide to set up the scanner. Details on using the

scanner are described in the User's Guide packaged with the scanner. Before you start using

the scanner, make sure to thoroughly read the User's Guide.

Checking the Packing List

When you unpack your scanner, make sure that it contains all of the following accessories.

If any of the items listed below are missing or damaged, contact your local authorized Canon

dealer or service representative.

DR-2580C Scanner

AC Adapter/Power Cord

USB Cable

DR-2580C

Easy Start Guide

User's Guide

Setup Disc

(This Manual)

Retard Roller

Roller Unit

Job Labels

0880281099-L5T1P7-BR01

C A N O N

6 3 9 0

D I X I E

C A N A D A

R D

I N C .

M I S S I S S A U G A

O N

L 5 T

9 Z 9

Quick Reference

Warranty Card

Registration Card

Guide

(U.S.A and Canada only)

Note

To use the roller unit and retard roller, you need to install them in the scanner.

"Installing the Rollers"

The DR-2580C Setup Disc contains the "DR-2580C Scanner Driver" and

"CapturePerfect 3.0". For details, refer to "About the Setup Disc" on page 16 of

the User's Guide.

The following application software is included on the application software disk

that comes with this product.

[Presto! BizCard Reader SE] Name card management software provided with the

multi-language OCR made by NewSoft Technology Corp.

[OmniPage SE]* Optical character recognition (OCR) software with multiple

language support, made by Nuance Communications Inc.

[PaperPort

11]* File management application that makes it easy to store, orga-

nize, and retrieve digital documents, made by Nuance Communications Inc.

* In order to receive support of OmniPage SE and PaperPort

upgrade to a Professional version.

Please see following URL for upgrade.

http://www.nuance.com/partneroffer/canon

Items included in this package are subject to change without notice.

Keep the package and packing materials for storing or transporting the scanner.

After checking the package contents, you need to prepare the

scanner for use. (

STEP2)

Removing the Packing Materials and

Installing the Rollers

Perform the following steps to remove the scanner from the box, remove the orange

tape and protective sheets from the scanner, and install the roller unit and retard roller

in the scanner.

Peel off all the orange tape from the outer casing.

When peeling off the protective tape fastening the document eject tray extension,

hold the document eject tray extension firmly in place with your hand.

Document Eject Tray Extension

PUB. CE-IE-637

©CANON ELECTRONICS INC. 2008

Open the rear cover and remove the protective sheet.

3 .

After pushing both sides of the rear cover closed, open the document feed tray.

4 .

While squeezing the OPEN knob from both sides, open the upper unit.

OPEN Knob

Document Guide

Adapters

Remove the orange protective tape together with the protective sheet.

Application

Software Disc

Check that all the protective tape and protective sheets have been removed,

and then install the roller unit and the retard roller in their designated locations.

Adobe Acrobat

Setup Disc

Roller Unit

Retard Roller

6-1

Follow the steps below to install the roller unit in the upper unit.

1. Flip up the lock lever (1), and slide it to the right (2).

2. Load the roller unit onto the scanner's shaft.

11, you need to

3. Slide the protrusion on the roller unit into the groove on the scanner, and then lift the

roller unit into place.

4. Slide (1) and close (2) the lock lever to lock the roller unit.

6-2

Follow the steps below to install the retard roller on the inside of the roller cover.

1. Remove the roller cover.

Trademarks

• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries.

• Microsoft Windows

is a registered trademark of Microsoft USA in the United States and other countries.

PRINTED IN JAPAN

• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective companies.

Rear Cover

Document Feed Tray

Upper Unit

Lock Lever

Flip up the retard roller lock lever (1), and slide it to the right (2)

3. Load the retard roller so that the notch in the roller is aligned with the scanner's shaft.

4. Slide the lock lever to the left so that it fits into the retard roller hole (1), and then

press the lock lever completely down to lock the retard roller (2).

5. Attach the roller cover.

Gently close the upper unit.

Make sure it is closed securely by pushing on both edges until you hear a click.

The scanner is now ready for use.

Next, you need to install the scanner software. (

Installing the Software

Install the software before connecting the scanner to the computer.

Warning

Do not connect the scanner to the computer before installing the software. If

you connect the scanner and turn it ON before you install the software, the

wizard screen on the right will appear. If this wizard is displayed, click the

[Cancel] button to exit the wizard, and turn the scanner OFF.

Wizard Screen (Windows XP)

Be sure to log on with administrator privileges when logging on to Windows.

Close all other applications before installing the software.

Turn ON your computer.

Insert the DR-2580C Setup Disc into the

computer's CD-ROM drive.

The setup wizard automatically starts up when

you insert the CD-ROM into the CD-ROM

drive. If the setup wizard does not start up, run

the setup.exe application on the CD-ROM.

STEP3)

Continued on back side