Canon 3000ex - CanoScan Color Flatbed Scanner Manuale di avvio rapido - Pagina 11
Sfoglia online o scarica il pdf Manuale di avvio rapido per Scanner Canon 3000ex - CanoScan Color Flatbed Scanner. Canon 3000ex - CanoScan Color Flatbed Scanner 19. Color image scanner
Using the Scanner Buttons
You can use the three convenient buttons on the front panel of the scanner to scan and perform related
tasks easily with a single touch of the button. Place an item on the document glass of the scanner before
pressing a button.
• To use these buttons, ScanGear CS, CanoScan Toolbox and ArcSoft PhotoBase should be
installed from the CanoScan Setup Utility CD-ROM.
SCAN Button
To open the scanned image in the PhotoBase
window:
1
Press the [SCAN] button.
2
The scanner will scan the item.
3
The scanned image will appear in the
PhotoBase window.
COPY Button
To print (copy) the scanned image with a printer:
1
Press the [COPY] button.
2
The scanner will scan the item.
3
The scanned image will print.
• The printer driver should be installed and the
printer should be on-line to use this function.
• While scanning, you can change the default settings for scanning by clicking the
[Cancel] button. For changing settings or arranging the scanner button assignments,
refer to the "CanoScan Toolbox" section of the Scanning Guide (HTML format manual).
SCAN
COPY
To e-mail the scanned image as an attached file:
1
Press the [E-MAIL] button.
2
The scanner will scan the item.
3
The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
This step is required only for the first scan.
4
The e-mail software will start and the
scanned image will be attached in a
new message window.
5
Enter the receiver's address and title,
write a message, confirm the required
settings, and send the message.
• The e-mail software, such as Outlook Express,
Microsoft Outlook, Eudora or Netscape
Messenger, should be installed and enabled.
With certain e-mail programs, you should
enable the MAPI function.
E-MAIL
E-MAIL Button
9