Akw Onyx 25436R-LS Manuale d'installazione e d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Apparecchiature per il bagno Akw Onyx 25436R-LS. Akw Onyx 25436R-LS 12. Combo shower mixer

User Care Instructions

Shower Mixer Use
The shower rail mixer must be used only for the task it is intended to perform.
It is advised that this product should be checked as part of a planned maintenance programme.
Children and other users may require supervision when using this product. If any maintenance is
required, it must be carried out by a competent installer.
Keeping your AKW Shower Mixer Clean
This product should be cleaned periodically to remove any accumulation of hair, soap or other
waste material, using normal domestic bathroom cleaning materials. It is important to keep areas
such as seals and moving parts clear from build up of grime and water deposits to maintain good
working order. Always rinse the shower area with warm water and then wipe thoroughly with a
damp cloth to remove any cleaning material residues before drying off.
Disinfecting
Where disinfecting is necessary, standard established procedures for disinfecting equipment
should be used with due care and attention taken of the warnings concerning possible effects of
aggressive chemicals on plastics and metals. Do not use strong or concentrated acidic, alkaline, or
other cleaning materials on an abrasive pad as these may discolour or damage the product. If more
thorough cleaning is needed using domestic cleaning products always test on a small area first and
read the label warning first.
Packaging
Packaging should be disposed of in accordance with local recycling regulations.
Further information
These instructions are provided to advise the minimum standards of installation and recommend
what the best practice for the installation is. Due to the very wide variability of possible installation
conditions, AKW cannot provide all circumstances for the installation. AKW cannot accept any
liability in connection with this information or its use. This information is provided on the condition
that the person receiving it shall make his/her own tests to determine the suitability for his/her
particular purpose. Failure to install this AKW product in accordance with supplied instructions
or the making of unauthorised modifications will invalidate any warranty and may affect product
safety. none of the foregoing affects your statutory rights.
Order: 01905 823 299
|
orders.akw-ltd.co.uk
Technical Support: 01905 560 219
11