Canon CanoScan 9000F Mark II Manuale di avvio rapido
Sfoglia online o scarica il pdf Manuale di avvio rapido per Scanner Canon CanoScan 9000F Mark II. Canon CanoScan 9000F Mark II 5.
Anche per Canon CanoScan 9000F Mark II: Manuale di avvio rapido (8 pagine)
Stampa la pagina
Scan film with the Canon
CanoScan 9000F Mark II
N
If you encounter an error message when attempting a scan using any uCreate
ote:
scanner, please consult the Troubleshooting section on page 5.
For the care of your film and the scanner glass, it is important that your hands
are clean before commencing and that you avoid touching the scanner glass.
It is also important to avoid touching the image area of your film, as any
small dirt specks or fingerprints will become magnified when the images are
scanned at high resolution.
1
When using the Canon scanner to scan film or slides, make sure the cover which fits under the
scanner lid is removed.
The cover's securing mechanism is fragile so remove it very carefully by gently pressing the clip
at the top of the cover down and towards you.
Please replace the inner cover when you are finished scanning by slotting the tabs at the bottom
of the inner cover into the lower part of the scanner lid then pressing gently on the clip at the top to
secure it.
August 2018
The clip at the top of the inner
Replacing the cover after use:
the cover into the slot in the lid
before securing the clip at the top
www.ed.ac.uk/is/ucreate
1
cover which secures it to the
underside of the scanner lid
slide the tabs at the bottom of