Canon CanoScan D2400UF Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Scanner Canon CanoScan D2400UF. Canon CanoScan D2400UF 27. Usb flatbed scanner
Anche per Canon CanoScan D2400UF: Manuale di avvio rapido (15 pagine), Manuale d'uso (32 pagine), Informazioni tecniche (2 pagine)

Stampa la pagina

Saving Film

To save the scanned film;

Set the film in the film guide and place it on the scanner.

Push the Film Scan Button to start the CanoScan Toolbox.

Select [Scan and Save the Image] from theCanon Scanner Assistant and click [Next].

Select either [Quick and Easy Scanning](displaying scanner driver window) or [Expert

Scanning](without displaying scanner driver window).

If you select [Quick and Easy Scanning];

(1)

Specify the setting items and click [Next].

If you select [Expert Scanning];

(1)

The Plug-in Module window displays.

(2)

Select [Film] from [Preferences] menu and specify [Film Size] and [Film Type] in the

[Film] menu.

(3)

Adjust the previewed image and click [Scan].

The document is scanned. Enter the file name and specify the folder and the drive in which the

image is saved (Initially, the file name is set to Image0001 and the folder is set to [Photo] in

[CanoScan Toolbox]).

CanoScan Toolbox

When you scan the 35mm film without

displaying the driver software, the scanned area

is slightly smaller than the actual frame.

With 35mm sleeve film, up to 3 frames can be

scanned continuously. Select [Sleeve] in [Scan

Frames] and specify the scanned frames in

[Frame Selection].

When you scan 2 or 3 frames continuously,

sometimes the gap between frames may be

scanned and the vertical stripe may appear in the

image. This occurs because the width between

frames differing from the film type and setting

position causes slight disalignment of the

scanned area. In this case, place the objective

frame in the first position and scan one frame at a

time.