Canon imageFormula DR-C225W Manuale di connessione Wi-Fi - Pagina 6

Sfoglia online o scarica il pdf Manuale di connessione Wi-Fi per Scanner Canon imageFormula DR-C225W. Canon imageFormula DR-C225W 40.

The procedure for connecting to an access point using the Wireless

Connection Setup Tool in Station Mode is described here.

Connecting using the WPS function................................................. 11

Connecting to a Specified Access Point .......................................... 16

Connecting using the AP Mode......................................................... 23

How to Connect Smart Devices......................................................... 24

This procedure describes the operation by following the on-screen

instructions of the Wireless Connection Setup Tool's Easy Setup.

Custom Setup allows arbitrary network configuration for the

scanner. For details, refer to "Chapter 3 Changing Scanner

Settings".

Connecting Using the Wireless Settings on

the Computer

Use [Easy Setup] of the Wireless Connection Setup Tool to obtain

the necessary network information from the wireless settings of the

computer connected to the wireless LAN access point, and connect

the scanner to the same network.



If the access point is using security settings (such as MAC address

filtering), change the settings to allow connection to this scanner.



To ensure good Wi-Fi communications, perform this procedure with

the scanner initially located close to the access point.

If the scanner is on, turn it off.

Press and hold the power button until the indicator goes out.

Enable the wireless LAN function of the computer.

This step is not necessary if the wireless LAN function is already enabled.

See "About the Computer's Wireless LAN Function" on p.21 for wireless LAN

function setting details.

Start the Wireless Connection Setup Tool.