Akw M11 DigiPump Istruzioni per l'installazione e la cura dell'utente - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per l'installazione e la cura dell'utente per Pompa dell'acqua Akw M11 DigiPump. Akw M11 DigiPump 20.

For Optimum Performance

Pipe Cutter

JG TS

DO Cut plastic pipe using a pipe cutter

Do NOT use damaged pipe

Note:

Remove any chrome plating on pipework of at least 20mm before inserting this type

PIPEWORK.

Fixing pump to surface

Important: For service & maintenance purposes this product must be installed in an

accessible location.

Pipe connections must be easily accessible and a clearance of 100mm around the

base and sides is recommended.

The pump unit must be located on a vertical surface with the

inlet/outlet connections at the bottom of the unit in horizontal

alignment, with the AKW case logo uppermost.

The unit must be located away from the direct line of water jets whenever possible.

DO NOT tile up to the pump unit on the wall, only fix onto surface.

Speedfit

Pipe

Do NOT use a hacksaw to cut plastic pipe

Do NOT use Speedfit

pressure lines as they create blockages

pipe inserts on low

100mm (4in)