Astro Tool 612179 Foglio di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Foglio di istruzioni per Utensile a crimpare Astro Tool 612179. Astro Tool 612179 2. 7-step adjustable crimp tool

Stampa la pagina

GAGING INSTRUCTIONS

Gaging the tool requires Astro part # 621068 Gage

Pin Assembly.

1. Set the tool to selector setting # 4.

2. Close the handles to the fully closed position.

3. Holding the tool closed, insert the GO pin into the

indenter opening as shown, see figure # 1 The gage must

pass freely between the indenter tips.

4. Holding the tool closed, insert the NO GO pin into

the indenter opening. The gage pin must NOT go

between the indenter tips.

Gage Pin

DO NOT CRIMP GAGE.

TOOL DAMAGE WILL RESULT.

ASTRO TOOL CORP. MANUFACTURERS OF INSERTION, REMOVAL,

CRIMP TOOLS AND CONNECTOR SERVICE KITS

ASTRO TOOL CORPORATION • 21615 S.W. T-V HWY. • BEAVERTON OREGON 97003

Indenter

Figure # 1

CAUTION:

503-642-9853 • FAX 503-591-7766

GAGING INFORMATION

( Dimensions in Inches )

SELECTOR

SETTING

NUMBER

TOOL SERVICE

Astro Tool's 612179 Crimp Tool is designed for

long, reliable service. If the tool becomes inoperative or

does not gage properly, it is suggested that you contact

our Customer Service Department for a Return Goods

Authorization number and return the tool to our factory.

Upon receipt of the tool, Astro will inspect and

overhaul each tool to put the tool back into acceptable

and efficient operating condition. Worn parts will be

replaced or repaired. Please note that Astro's Quality

Control system is traceable to The National Institute of

Standards and Technology (N.I.S.T.).

Service charges for tools not under warranty will be

advised upon request.

Parts that Astro deems to have been damaged due to

neglect, misuse or accident; and parts that have been

altered or repaired by persons other than Astro Tool

Corp. employees will be replaced subject to additional

charge for such parts.

NO GO

SIZE

± .0001

±.0001

.0280

.0350

.0320

.0390

.0380

.0450

.0440

.0510

.0520

.0590

.0580

.0650

.0660

.0730

5-21-15 TI179-93-1