Astro Tool 620667 Come si usa

Sfoglia online o scarica il pdf Come si usa per Utensile a crimpare Astro Tool 620667. Astro Tool 620667 2. Large dedicated crimp tool
Anche per Astro Tool 620667: Manuale (2 pagine)

Stampa la pagina

HOW TO USE THE LARGE DEDICATED CRIMP TOOL

GENERAL

The 620667 is a cycle controlled hand crimping tool.

It is a fast, versatile, manually operated, octadent tool for

crimping circular pin and socket contacts.

This tool is configured for one specific wire size and

is set to .071" at the factory and locked in place. The

620667 also includes a locator that is permanently

attached. No operator adjustments are required.

For long life and optimum performance, this tool

should be kept clean and handled carefully, as any other

precision instrument.

OPERATION

Open and close the tool several times and observe the

precision cycle control ratchet mechanism. Note that the

tool may not be opened or closed without completing the

cycle.

ASTRO TOOL CORP.

CONNECTOR ASSEMBLY TOOLING

Catalog Number 620667

TOOL GAGING

It will be necessary to verify the opening by using a

gage pin assembly. Gage, 620667-G, is available to

properly gage this hand tool. Close the tool completely

and insert the GO end of the gage assembly between the

indenters, as shown in figure #1.

Gage Pin

The GO pin should slide freely between the indenter

tips.

Close the tool down completely and insert the NO

GO end of the gage assembly into the indenter opening

as shown in figure #1.

The NO GO pin must NOT go between the indenter

tips.

DO NOT CRIMP GAGE

TOOL DAMAGE WILL RESULT.

Indenter

Figure #1

CAUTION:

9-19-14 TI667-14-0