ASTRO-PHYSICS 400QMD Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per Telescope ASTRO-PHYSICS 400QMD. ASTRO-PHYSICS 400QMD 11. German equatorial mount with dual axis quartz micro-drive
Stampa la paginaASSEMBLE PIER OR TRIPOD
Begin by assembling the pier or tripod at the observing location.
ADJUSTABLE ALUMINUM TRIPOD: Extend the legs to the desired height; secure with the locking levers. Adjust the
distance between the legs. Place the legs far enough apart to provide a solid base of support. Please refer
to the diagram below.
ADJUSTABLE HARDWOOD TRIPOD: Remove the tripod from its carrying case and attach the shelf to each of the
three legs with the knobs provided. Adjust legs to the desired height and spread. Lock in position with the
hand knobs. Please refer to the diagram below.
PIER: Slide the three legs onto the nubs of the base. Place the pier post on the base and attach the tension rods.
The turnbuckles should be drawn tight until the whole assembly is stiff enough to support your weight
without movement. Please refer to the diagram below.
ASSEMBLE MOUNT TO PIER OR TRIPOD
In order to track the motion of astronomical objects, the polar axis must be positioned so that an imaginary line drawn
through the hollow shaft points toward the celestial pole. At this stage of the assembly process, you want to position
the mount so that it points roughly north. Place the mount into the top of the pier or tripod so that the threaded R.A.
axis hole is on the south side of the pier/tripod. Line up the holes of the mount and pier/tripod. Screw in the three
hand knobs to hold the mount in place.