Canon EF-M 55-200mm f/4.5-6.3 IS STM Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Obiettivo della fotocamera Canon EF-M 55-200mm f/4.5-6.3 IS STM. Canon EF-M 55-200mm f/4.5-6.3 IS STM 2.

Stampa la pagina

EF-M LENS Instructions

ENG

EF-M55-200mm f/4.5-6.3 IS STM

①

⑦

②

③

④

Nomenclature

① Focusing ring

② Hood mount

③ Filter Mounting Thread

④ Lens mount index

⑤ Contacts

⑥ Zoom position index

⑦ Zoom ring

Thank you for purchasing a Canon product.

The Canon EF-M55-200mm f/4.5-6.3 IS STM lens is a

telephoto zoom lens developed for digital cameras compatible

with EF-M lenses*.

* Only the following cameras are compatible with EF-M lenses (as

of February 2014):

EOS M, EOS M2*

: Not available in certain countries and regions.

• "IS" stands for Image Stabilizer.

• "STM" stands for stepping motor.

Safety Precautions

• Do not look at the sun or a bright light source through the

lens. Doing so could result in vision loss or blindness.

• Whether it is attached to the camera or not, do not leave

the lens under the sun without the lens cap attached. This

is to prevent the lens from concentrating the sun's rays, which

could cause a fire.

CT1-8598-000

Handling Cautions

• If the lens is taken from a cold environment into a warm

one, condensation may develop on the lens surface and

internal parts. To prevent condensation in this case, first

put the lens into an airtight plastic bag before taking it from a

cold to warm environment. Then take out the lens after it has

warmed gradually. Do the same when taking the lens from a

⑥

warm environment into a cold one.

• Do not leave the lens in excessive heat such as in a car in

direct sunlight. High temperatures can cause the lens to

malfunction.

• Please also refer to the handling cautions found in your

camera's instructions.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or

damage.

Supplementary notes on using the lens and taking

pictures.

⑤

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless

otherwise specified in the instructions. If such changes or modifications

should be made, you could be required to stop operation of the

equipment.

This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3 (B)

1. Mounting and Detaching the Lens

See your camera's instructions for details on mounting and

detaching the lens.

•

After detaching the lens, place the lens with the rear end

up to prevent the lens surface and contacts from getting

scratched. (fig.❶)

•

If the contacts get soiled, scratched, or have fingerprints on

them, corrosion or faulty connections can result. The camera

and lens may not operate properly.

•

If the contacts get soiled or have fingerprints on them, clean

them with a soft cloth.

•

If you remove the lens, cover it with the dust cap. To attach

it properly, align the lens mount index and the  index of the

dust cap as shown in the diagram, and turn clockwise. (fig.❷)

To remove it, reverse the order.

2. Zooming

Turn the lens' zoom ring to adjust the size of the photo field or

subject. (fig.❸)

• For wider shots, turn the zoom ring toward the wide end.

• For closer shots, turn the zoom ring toward the telephoto end.

•

Be sure to finish zooming before focusing. Zooming after

focusing can affect the focus.

•

Blurring may temporarily occur if the zoom ring is quickly

rotated.

•

Zooming during still image exposure will result in delayed

focus. This causes any streaks of light that are captured

during exposure to be blurred.

3. Manual Focus

When the camera's focus mode is set to [MF], focus manually by

turning the focusing ring (fig.❹).

Quickly rotating the focusing ring may result in delayed focus.

•

Focus mode is set using the camera. Please refer to the

camera's instructions.

•

After autofocusing in [AF+MF] mode, focus manually by

pressing the shutter button halfway and turning the focusing

ring (full-time manual focusing).

4. Image Stabilizer

This lens is equipped with an Image Stabilizer. This function

corrects camera shake, allowing users to capture sharp images.

Also, the Image Stabilizer automatically provides optimal image

stabilization depending on shooting conditions (such as shooting

still subjects and following shots). Please set the Image Stabilizer

ON or OFF using the camera settings. See your camera's

instructions for details.

•

The Image Stabilizer cannot compensate for a blurred shot

caused by a subject that moved.

•

The Image Stabilizer may not be fully effective if you shoot

from a violently shaking vehicle or other transportation.

•

The Image Stabilizer consumes more power than normal

shooting, resulting in fewer shots and a shorter movie

shooting time.

•

When shooting a still subject, it compensates for camera

shake in all directions.

•

It compensates for vertical camera shake during following

shots in a horizontal direction, and compensates for

horizontal camera shake during following shots in a vertical

direction.

•

When you use a tripod, the Image Stabilizer should be

turned off to save battery power.

•

Even with a monopod, the Image Stabilizer will be as

effective as during hand-held shooting.

However, depending on the shooting environment, the

Image Stabilizer effect may be less effective.

❶

❷

❸

Wide end

Telephoto end

Zoom ring

❹

ENG-1