COLAMY 2219 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Arredamento per interni COLAMY 2219. COLAMY 2219 2.

Stampa la pagina

WARNING

Please read the instructions carefully and follow the assembly steps.

To ensure proper assembly, please follow all steps and use all parts provided. Not following

this warning may result in serious injury to you or others.

To prevent misalignments, keep the screws loose and do not tighten them until they are all

in their correct positions.

Avoid overtightening or forcing the screws, as this could cause them to break, strip, or

damage the threads of the holes.

Using the wrong size of screws for a particular part could cause damage to the screw or the

part.

Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months,

or as needed.

PRODUCT FEATURES

Pneumatic Seat Height

Adjustment

Pulling the lever upwards enables

height adjustment of the seat, then

the seat can be locked at a fixed

height by releasing the lever.

Convenient Hidden Footrest

Simply pull out the footrest by

hand and kick it back by your feet

to retract

Tilt Angle Adjustment

Simply pull up the lever and recline

back to adjust the tilt angle, and then

push down to lock the backrest.

SAFETY INFORMATION

WEIGHT CAPACITY FOR SEATING: 400LBS

Do not sit at the front edge

Do not stand on the chair

Do not use the chair with more

of the chair

than one person

Sit in the center of the

chair with your back

against the backrest

Do not push the chair around

Do not push down on the

Do not place all your weight

when a person is sitting in it

backrest when a person is

on the backrest only

reclined

ASSEMBLY PARTS AND TOOL

BEFORE YOU GET STARTED, A FEW POINTERS:

Having a friend to help makes

Mind the important safety

assembly extra-easy

information

Back Cushion *1

Seat Cushion *1

Arms *2

Star Base *1

Lift *1

Lift Cover *1

Casters *5

1 1

Bolts M8*16mm *4

Bolts M8*57mm *4

Plastic Caps *4

Wrench *1

[email protected]

PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED.

MISSING PARTS?

ASSEMBLY INSTRUCTIONS

Turn the Star Base(4) upside down, then press the Casters(7) into the holes at the end of

Step 1

each base leg.

Insert the Lift(5) into the center hole of the Star Base, the Lift Cover(6) should be placed

Step 2

over the Lift.

Attach the Back Cushion(1) and Seat Cushion(2) with FOUR M8*16mm Bolts(8), tighten all

Step 3

the bolts with the Wrench(1 1).

Note 1: Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%.

1 1

Bolts M8*16mm *4

1 1

Wrench *1

Push the seat cushion down onto the lift firmly until the connection is secure.

Step 4

Attach the Arms(3) to the Seat Cushion(2) and Back Cushion(1) with FOUR M8*57mm

Step 5

Bolts(9), using the Wrench(1 1).

Note 1: Arm rests are labeled with an "L" (left) or "R" (right) to show which sides they should be

placed on.

Note 2: Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%.

Bolts M8*57mm *4

1 1

Wrench *1

Press the Plastic Caps(10) into the Arms holes to cover the bolts.

Step 6

Plastic Caps *4