AIR GUARD AG-1600 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Macchina della nebbia AIR GUARD AG-1600. AIR GUARD AG-1600 13.

Product Overview

Fog Output Nozzle

Wireless Receiver (antenna)

Power Inlet

Power Switch

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm open

space at each side of the machine and 2 meters for the output direction of the machine.

Step 2: Fill the fluid tank with Air Guard fluid.

Step 3: Connect the machine to suitably rated power supply. To determine the power requirement

for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the power switch. Once powering up the machine, it takes approximately 6 minutes

to complete the warming-up process to make heater reach operating temperature to work.

Breaker

LCD control panel