Astrolite LED QUAD GEM Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ Astrolite LED QUAD GEM. Astrolite LED QUAD GEM 6.
Stampa la pagina
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next
fixture. Always connect one output with the input of the next fixture until all fixtures are
connected.
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
OPERATION
DMX operation mode
Addressing
After you connect the item to the mains, the item starts running. During the Reset, the motors
are trimmed and the device is ready for use afterwards. The four-digital LED display on the
back side of the item allows you to assign the DMX fixture address, which is defined as the first
channel from which the item will respond to the controller. If you set, for example, the address
to channel 7, the item will use the channel 7 to 12 for control. Please, be sure that you don't
have any overlapping channels in order to control each item correctly and independently from
any other fixture on the DMX data link. If two, three or more items are addressed similarly, they
will work similarly. When the item finishes resetting, A-OO1 will flash in the led display and
then set the desired DMX address by pressing the UP or DOWN buttons.
DMX Controlling:
After having addressed all items, you may now start operating these via your lighting controller.
After switching on, the item will automatically detect whether DMX 512 data is received or not.
If the data is received, the green led dot in the display flashes.
Control channel 1—on/off, flash
1-7
LED on
8-255
flash from slow to fast
Control channel 2—running programs
1-171
running programs with four projections from right to left
172-255
running programs with four projections from left to right
Such channel works together with channel 4, channel 5, channel 6, channel 7.
Control channel 3—15 preset shows
Control channel 4—LED pattern effects
1-20
white
21-47
red
48-72
green
73-95
blue
96-141
green+red
142-165
blue+red