Coldair PLATINUM Multi Season Manuale di istruzioni per l'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Riscaldatore Coldair PLATINUM Multi Season. Coldair PLATINUM Multi Season 12. 107cm multi season heating & cooling tower fan heater

Stampa la pagina
Operating your Appliance
AUTO ECO THERMOSTAT
Pressing the
or
buttons while in any Heater function or speed will turn on the
Auto Eco™ function.
To set the room at a specific temperature press the
or
buttons to the desired
temperature. The display will now reflect the Auto Eco™ symbol and the temperature
will be flashing. The Heater is now in Auto Eco™ Mode.
When you reach the temperature at which you want to set the unit, the set
temperature will flash several times and then the display will return to indicate the
current room temperature and will gradually change as the room temperature
changes. NOTE: the temperature display does not indicate the temperature of the
heated air being emitted by the Heater.
Once the room temperature reaches 2 degrees above the set temperature, the Heater
will shut off. The Heater will continue to run for 15 seconds after the element has
turned off.
If the ambient temperature is equal to the SET temperature, the Heater will run in
LOW heat.
If the ambient temperature is less then the SET temperature by more than 3 degrees,
the Heater will run in HIGH heat.
All of this happens automatically with Auto Eco™ Technology.
To deactivate the Auto Eco™ function, turn the Heater off or press the
button.
NOTE: In Auto Eco™, the Heater will display the current room temperature in °
Fahrenheit. Press the
and
buttons at the same time to change the display to °
Celsius.
FAN
Turn the Fan ON by pressing the Fan Power Button
.
Upon turning the Fan on, the unit will be in High Speed (F4).
Press the Fan Mode Button
for Medium Speed (F3). Press again for Low Speed (F2).
Press a third time for Super Low Speed (F1).
Press a fourth time to return to High Speed (F4).
To turn the Fan OFF, press the Fan Power Button.