Coldair GCPF160 Manuale di istruzioni per l'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ventilatore Coldair GCPF160. Coldair GCPF160 12. 40cm pedestal fan with remote
Stampa la pagina
WARNING:
The fan should not be connected to the power mains during
assembly
Assembly of switch compartment, motor and grill
•
Loosen the fan body retaining nut (15) and place the fan body
on to the inner stand pole (17). Tighten the fan body retaining
nut (15) to secure in place.
•
Unscrew the blade lock (3) from the motor shaft (7) by rotating
it clockwise.
•
Unscrew the grill lock (5) by rotating it anti-clockwise.
•
Position the back grill (6) on the motor shaft/motor housing
(7/8) and ensure that the locating pegs are engaged correctly in
the holes in the grill.
•
Tighten the rear grill with the grill lock (5) by rotating clockwise
and tighten firmly.
•
Place the fan blade (4) onto the motor shaft (7), locating the
slot at the back of the blade on the drive pin that passes
through the motor shaft (7).
•
Tighten the fan blade (4) with the blade lock(3) counter
clockwise.
•
Loosen the locking screw mounted on the grille. Place the front
grill (2) onto the back grill (6) ensuring that the small round
holes are positioned to allow the locking screw through. Fix
both grilles with the clips then use screwdriver to tighten the
locking screw.
Assembly