Cole & Bright SECURITY 63728 Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di illuminazione Cole & Bright SECURITY 63728. Cole & Bright SECURITY 63728 8. Solar powered + linkable eclipse secur ity light

Stampa la pagina

OPERATING INSTRUCTIONS

The switch located on the front of the solar light panel housing in between

the lights is to turn on the product and also to link your Radar 360˚ linkable

lights together (if you are creating a linked network)

CHARGING YOUR RADAR 360˚ LIGHTS

FOR THE FIRST TIME

1. Find a location where your light is exposed to full sunlight for at least 8

hours. This will typically require a full day so start charging in the morning.

2. Turn your light switch to the "M"

position for charging to commence.

3. After charging is complete or it is getting

dark, turn your switch to OFF until you are

ready to start the LINK process. This

prevents the battery from running down

again, if there is a delay between charging,

LINKING and installation.

LINKING YOUR RADAR 360˚ + LIGHTS FOR THE FIRST TIME

Only TWO (2) Lights (

1. Make sure your lights are fully charged before you commence

the Link procedure.

2. Take the 2 lights you wish to pair and place

the lights upwards on a level ﬂ at surface.

3. Choose one light to be a Master light.

The other light(s) will then be

Secondary light.

for linking 3 or more lights, please see website)

MASTER

SECONDARY