Canon Pixma Pro9500 Series Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Software Canon Pixma Pro9500 Series. Canon Pixma Pro9500 Series 3. Printing on the fine art metal series
Anche per Canon Pixma Pro9500 Series: Istruzioni per la configurazione (2 pagine), Manuale (31 pagine), Istruzioni per la configurazione (2 pagine), Manuale supplementare (6 pagine), Specifiche tecniche (2 pagine), Manuale (25 pagine), Manuale di avvio rapido (20 pagine), Manuale di avvio rapido (2 pagine)

Printing on the Fine Art Metal with the Canon Pro 9500 Printer

1. Prepare Your Printer

Make sure you do NOT have any clogged nozzles.

Run the Nozzle Check before printing images. If

you run the test prints with clogged nozzles it will

throw off your color once they are unclogged.

(Please refer to your printer manual for additional

instructions)

2. Loading the Fine Art Metal into the printer

A. The metal requires to be loaded into the front path

of the Pro 9500.

B. Open the front tray

C. Its recommended to wear gloves at all times when

handling the Fine Art Metal.

D. Gently press the release button as shown in

picture #1 to release the front tray and tilt it forward.

E. Lift the front tray until it stops as shown in picture

#2. The front feed button will light.

F. While keeping the front tray lifted , tilt the front

tray forward to set it in Front Paper Feeding

Position as shown in picture #3.

G. Ensure that the Front Feed Button is lit.

H. Press the Rear Support Button to open the Rear

Support as shown in picture #4.

I. Pull out the Front Extension completely as shown

in picture #5

J. Press the right corner of the rear support to open

the rear support extension as shown in picture #6.

K. Press the Front Feed button. The printer starts

making operating noises and then the Power lamp

flashes for about 20 seconds.

L. Ensure that the Power lamp is lit and the Front

Feed button is flashing quickly.

M. Load the metal straight into the tray with the

print side facing up. Align the front edge of the paper

with the Sheets/Arrow mark on the Front Tray.

Align the right edge of the paper against the right

side of the front tray as shown in picture #7.