Daekyung DTR-300N Manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Manuale operativo per Apparecchiature di prova Daekyung DTR-300N. Daekyung DTR-300N 15. Rockwell hardness tester

5.9.14 Debug Mode Non

5.9.15 Exit

(F.

5.10 ∅ Function

5.10.1 R. Cylinderical: Enter a radius (R) value for a cylinder-shaped specimen.

1) Initial value: R = 0.00 mm

2) ex) Enter a radius value, R10, when the specimen has the radius of Ø

Press the Enter key after setting as R = 10.00 by using the Up/Down/Left/Right arrow keys (↑,↓,←,→)

3) Maximum input range: R = 19.99 mm

◉ ← → : Adjust digit numbers

◉ ↑ ↓

◉ Enter

◉ Reset

5.10.2 D Spherical: Enter a diameter (Ø) value for a spherical-shaped specimen.

1) Initial Value: D = 0.00 mm

2) Ex) Enter a diameter value, Ø 20, when the specimen has the diameter of Ø 20.

Press the Enter key after setting as D = 20.00 by using the Up/Down/Left/Right arrow keys (↑,↓,←,→)

3) Maximum input range: D = 25.99 mm

◉ ← → : Adjust digit numbers

◉ ↑ ↓

◉ Enter

◉ Reset

5.10.3 Exit : Exit the menu.

5.11 Others

5.11.1 If R is entered, D is set as Ø. If D is entered, R is set as Ø. At this

time, only one of the above cases is valid.

(E.Debug Mode:Print of the system status): (Inhibition of use),

Exit) : Exit the Manu

: Adjust selected digit numbers

: Confirm

: Cancel

: Adjust selected digit numbers

: Confirm

: Cancel

DAEKYUNG TECH & TESTERS Mfg. CO.,LTD

Initial setting value Non

- 9 -