Asus A7V-VM Manuale di avvio rapido - Pagina 21

Sfoglia online o scarica il pdf Manuale di avvio rapido per Scheda madre Asus A7V-VM. Asus A7V-VM 22. Athlon/duron microatx motherboard
Anche per Asus A7V-VM: Manuale d'uso (23 pagine)

Stampa la pagina

2. HARDWARE SETUP

17) System Message LED Lead (2-pin MLED)

This indicates whether a message has been received from a fax/modem. The

LED will remain lit when there is no signal and blink when there is data re-

ceived. This function requires an ACPI OS and driver support.

18) System Management Interrupt Lead (2-pin SMI)

This allows the user to manually place the system into a suspend mode or "Green"

mode, where system activity is decreased to save electricity and expand the life

of certain components when the system is not in use. This 2-pin connector con-

nects to the case-mounted suspend switch.

19) System Warning Speaker Connector (4-pin SPK)

This 4-pin connector connects to the case-mounted speaker.

20) Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting

your computer without having to turn off your power switch. This is a preferred

method of rebooting to prolong the life of the system's power supply.

21) System Power LED Lead (3-pin PLED)

This 3-pin connector connects the system power LED, which lights when the

system is powered on and blinks when it is in sleep mode.

22) IDE Activity LED (2-pin IDELED)

This connector supplies power to the cabinet's IDE activity LED. Read and

write activity by devices connected to the Primary or Secondary IDE connector

will cause the LED to light up.

23) ATX Power Switch Lead (2-pin PWR)

The system power is controlled by a momentary switch connected to this lead.

Pressing the button once will switch the system between ON and SOFT OFF.

Pushing the switch while in the ON mode for more than 4 seconds will turn the

system off. The system power LED shows the status of the system's power.

A7V-VM

A7V-VM System Panel Connectors

Message LED

ATX Power

Switch*

IDELED

Requires an ATX power supply.

A7V-VM User's Manual

SMI Lead

Speaker

Connector

Reset SW

Power LED