Dorex DX KA Istruzioni per l'installazione - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Sistema di apertura della porta Dorex DX KA. Dorex DX KA 4.

Stampa la pagina
04. INSTALL COVER PLATE
Cover Plate
Contacts External
Inhibit (EI)
Contacts Power
Supply
Insert cover plate back into the mechanism case.
NOTE: Be careful not to pinch cable when sliding
cover plate.
06. MOUNT EMERGENCY EXIT SIGN
Remove protective layer and stick Emergency Exit on door.
Contacts RX or
LM Switch
Emergency Exit Sign
05. INSTALL MOUNTING BRACKET AND END CAP
End Cap
Bracket
End Cap
Screws
End Cap
After all wire connections are made and device checked for
operation, install the end cap bracket, end cap and label .
07. CUT DEVICE (IF REQUIRED)
Tape
Cut off line
Cover Plate
(Flush to Push bar)
NOTE: Length measured from push bar to cutoff line must not
be less than 9-3/4" long.
3
Anti-Rattle Clip
End Cap Bracket
Screws
Pash Bar