Asus AT4NM10-I Manuale d'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale d'uso per Scheda madre Asus AT4NM10-I. Asus AT4NM10-I 44. User manual

Keyboard/mouse power and USB device wake-up (3-pin PS2_USBPW1-4)

This jumper allows you to enable or disable the keyboard/mouse and USB port 1-4

wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up

the computer by pressing a key on the keyboard, clicking the mouse or using a USB

device. This feature requires an ATX power supply that can supply at least 1A on the

+5VSB lead, and a corresponding setting in the BIOS. The USBPW1-4 jumper is for

the rear USB ports.

AT4NM10-I Keyboard/Mouse power setting and USB device wake-up

The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

USB device wake-up (3-pin USBPW5-8)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected USB

devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,

DRAM in slow refresh, power supply in reduced power mode).

AT4NM10-I USB device wake-up

• The USB device wake-up feature requires a power supply that can provide 500mA on

• The total current consumed must NOT exceed the power supply capability (+5VSB)

ASUS AT4NM10-I

PS2_USBPW1-4

+5V

the +5VSB lead for each USB port; otherwise, the system would not power up.

whether under normal condition or in sleep mode.

+5VSB

(Default)

1-10