Asus B150-PRO D3 Manuale tecnico - Pagina 14

Sfoglia online o scarica il pdf Manuale tecnico per Scheda madre Asus B150-PRO D3. Asus B150-PRO D3 18. Pin definition

20.

Flat panel display brightness connector (8-pin LCD_BLKT_PANEL)

This connector is for the LCD panel backlight and brightness

controls. It enables the LCD panel backlight, provides backlight

control signals, and provides brightness control signals for the

brightness button on the front panel.

21.

LCD panel monitor switch header (2-pin PANEL_SW)

This 2-pin header is for connecting a monitor switch that can turn off

the LCD panel display backlight.

22.

SATA power connector (15-pin SATA_PWRCON)

This connector is for the SATA power cable. The power cable

plug is designed to fit this connector in only one orientation. Find

the proper orientation and push down firmly until the connector

completely fit. To provide power to your SATA device, connect

the SATA power cable to this connector.

23.

Internal stereo speaker header (4-pin INT_SPK)

The internal mono speaker header allows connection to an internal,

low-power speaker for basic system sound capability. The subsystem is

capable of driving a speaker load of 4 Ohms at 3 Watts (rms).

24.

Internal DC power connector (2-pin ATX19V)

This connector is for an ATX power supply. The plug from

the power supply is designed to fit this connector in only one

orientation. Find the proper orientation and push down firmly

until the connector completely fits.

This connector supports 12V and 19V by models. Refer to the specification sheet of the

model for details.

1-14

LCD_BLKT_PANEL

PIN 1

PANEL_SW

GND

MON_SW#

PIN 1

SATA_PWRCON

INT_SPK

ATX19V

GND

DC_JACK_IN

PIN 1

Motherboard Pin Definition

PIN 1